Lamonster Power Plate

[Steamer]

Fuse

That's interesting, Steamer. Mine came from Lamont with a 10 amp fuse near the battery.
Pete

The fuse near the battery was marked at the top with a "5", but it had two prongs. It that a ten amp fuse?

 

[trikermutha]

The fuse near the battery was marked at the top with a "5", but it had two prongs. It that a ten amp fuse?

I yours says 5 then its a 5 amp.

FYI-
Do not put a larger fuse in as there are other factors to determine fuse size. Ex: Wire size etc. Could cause more problems by increasing the circuit protection (Fuse)

 

[Steamer]

OK

Thanks Trikermutha. I did replace the original fuse with a 5 amp fuse and will follow your advise to not increase the amps.
Curious that at least one power plate came with a ten amp

 

[trikermutha]

Stick with what came with the unit unless advised otherwise.

Wire size,specs on the USB can make the difference on what it is rated at for what it can handle .

Not enough information on the ten amp post to comment

Good Luck :thumbup:

 

[Lamonster]

We have revised the power plate power line. We now remove the glass fuse and replace it with the posi-loc fuse holder with a 7.5 amp fuse. The 18 gauge wire can carry 7.5 amp continuously and there is no need to have two fuses.