Key scabbard

[rwc]

pps:Some how lost the black Scabbard(Thingy) That holds the key.pps:pps: Does anyone know where I can get replacement? ray:
Thanks RWC

 

[finless]

Part number is #710001102

You can get them at many places. Just google search that number.

Here is an example:

http://www.gearhead.com/can-am-710001102.html#/s/BRP//710001102/1

Bob

 

[4 MARIE]

whew, glad I still have mine. I keep it in the same category as the "safety card".

 

[Bob Denman]

Another cheap option...

 

[Cruzr Joe]

The Bad News .............you have now voided your warranty because you lost the scabbard. :yikes::yikes::yikes:


The Good News ...........I was kidding, there is no good news. :roflblack::roflblack::roflblack::roflblack:


Cruzr Joe

 

[pegasus1300]

Another cheap option...

Bob how did you determine that you could drill a hole there and not damage the chip in your key. Was it just a lucky guess?

 

[Bob Denman]

:shocked: I'm too chicken to guess at anything...
Lamont posted pictures of a key taken apart, and it was pretty clear that you couldn't hit the chip with a hole up at the top of the key.
The hole is actually already there! nojoke
Take a pin, and push it in at that spot; it'll go right on through! :thumbup:

 

[trikermutha]

I bought one off eBay that needs no drilling and clamps around the key

 

[latony007]

Another cheap option...

That metal, wont it scratch? I had the same issue with my yamaha key scratching so i wound up getting one of those key chains that come part, like an air compressor fitting and super gluing the female part onto the side of my yamaha key. Actually works out really well cause i can put the spyder key on the same ring.

 

[rwc]

Lost and Found

Well rode to work and when I got home the holder was laying on carport in spot where I park. :banghead: So much for being observant. Thanks for all the help. Found that part number but could not believe the price for a small piece of plastic. :shocked: RWC

 

[Bob Denman]

:congrats: on finding it! :thumbup:

 

[Cruzr Joe]

Well rode to work and when I got home the holder was laying on carport in spot where I park. :banghead: So much for being observant. Thanks for all the help. Found that part number but could not believe the price for a small piece of plastic. :shocked: RWC

Your Warranty has been restored, with a caution. :roflblack::roflblack::roflblack::roflblack:


here is my key holder, google BMW silicon cover for more info comes in multiple colors

Cruzr Joe

 

[Bob Denman]

I have a couple of those silicon covers (in Orange...)
If you want them; PM me your mailing address.:thumbup:

 

[jrk36]

Part number is #710001102
Bob

Responding to old message, but .......
I ordered a 710001102 to replace my lost scabbard/sheath (BRP call it a FOURREAU). Unfortunately, it does not fit the key to my 2008 RS SM5 Maybe earlier models had a fatter key?

John K

 

[finless]

Responding to old message, but .......
I ordered a 710001102 to replace my lost scabbard/sheath (BRP call it a FOURREAU). Unfortunately, it does not fit the key to my 2008 RS SM5 Maybe earlier models had a fatter key?

John K

Odd.... I looked up the part number for that for the 2008. It lists the same part number!

See here.... It's item 11.

http://www.cheapcycleparts.com/oemp...28ecf5a006/electrical-accessories-steering-fs


Not sure what to tell you. Your key is a real can-am key correct?
Maybe there is some plastic flashing from the molding process that inside the holder keeping the key from going in?

Bob