• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Jacking up for the Baja Ron Sway Bar

Spyder ri

New member
Hi all. If I remove the frunk on my RS, will I still have to jack up the spyder to reach all the bolts? I don't have one and didn't want to buy one just for this install. Thanks!



2012 RS SE5
Mods:

Oxford Hot Grips
Bad Boy Air Horn
Two Brothers Exhaust
K&N air filter
LED mud flap lights
Tips Kit
Brake Light Modulator
IPS Key Cover
Up/out mirror Extensions
RSS stitched seat cover
Cal Sci touring windshield
5 spoke wheel upgrade
Ram mount Iphone cradle
LED turn signal indicators
Frunk Liner
BRP 12 Volt Outlet
Third brake light
Double Play tail light
 
You'll need to be able to get to the end links on each side... It's easier if you've got room enough to slide up under the bike... :dontknow: You probably should be able to reach everything that you need; it might just be a bit awkward... Good Luck! :thumbup:
 
No Need on the RS
2 10 mm bolts on bottom
4 10 mm Bolts on top
disconnect
trunk latch
plug thingy
horn wires
sensor wires on other side
Lift trunk right off- Grease fittings while you have it off IF you have grease and gun!!
 
No Need on the RS
2 10 mm bolts on bottom
4 10 mm Bolts on top
disconnect
trunk latch
plug thingy
horn wires
sensor wires on other side
Lift trunk right off- Grease fittings while you have it off IF you have grease and gun!![/QUOTE] :2thumbs: You might as well grease it while everything's out in the open... :thumbup:
 
Hi all. If I remove the frunk on my RS, will I still have to jack up the spyder to reach all the bolts? I don't have one and didn't want to buy one just for this install. Thanks!

You will not have to jack the Spyder up if you remove the Frunk. I've done it this way.
 
No..!!

No Need on the RS
2 10 mm bolts on bottom
4 10 mm Bolts on top
disconnect
trunk latch
plug thingy
horn wires
sensor wires on other side
Lift trunk right off- Grease fittings while you have it off IF you have grease and gun!!

did mine with out lifting the roadster..:thumbup: You'll have no problem...!!
 
Thank you!
Saved me some cashola for another farkle!



2012 RS SE5
Mods:

Oxford Hot Grips
Bad Boy Air Horn
Two Brothers Exhaust
K&N air filter
LED mud flap lights
Tips Kit
Brake Light Modulator
IPS Key Cover
Up/out mirror Extensions
RSS stitched seat cover
Cal Sci touring windshield
5 spoke wheel upgrade
Ram mount Iphone cradle
LED turn signal indicators
Frunk Liner
BRP 12 Volt Outlet
Third brake light
Double Play tail light
 
Back
Top