• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Is this tire pluggable?

llyrad

New member
Have a small puncture and was considering plugging it. But as I've never done it before (but understand how its done), I just want to make sure the location of puncture should be plugged or tire replaced?
attachment.php
 

Attachments

  • tire.jpg
    tire.jpg
    37.3 KB · Views: 37
  • tire.jpg
    tire.jpg
    37.1 KB · Views: 335
Last edited:
If that is a side wall then I don't believe it should be plugged. At least from what I recall but my memory is starting to go on me so I would replace it if it is a side wall. Unless someone with better knowledge can suggest a different approach,
 
Judging by the foam: it appears to be up in the tread area... that would be pluggable.

But I'd never plug the tire on a Spyder... It's just better to replace it. nojoke

(But that's just me! :D)
 
Judging by the foam: it appears to be up in the tread area... that would be pluggable.

But I'd never plug the tire on a Spyder... It's just better to replace it. nojoke

(But that's just me! :D)
Sorry Bob, you're not alone in feeling this way. I willl only have a MC ot trike tire plugged as a temporary "fix" until I can get it replaced. This is especially true of the 2-ply tires on a Spyder.
 
I have only plugged the sidewall of a tire two times. Both were on my 21 hp huskavana lawn mower. Anything that will go faster than a lawn mower, I would replace the tire.
 
Should never plug the sidewall of a street tire. I would make an exception to get off the side of the road to a shop but not as a perm fix.

https://www.kaltire.com/why-cant-you-repair-tires-with-a-punctured-sidewall/

I've run a plug on a few Jeep tires right at the edge of the tread and just had to replace the plug after a few years.
Really plugs are supposed to be a temp solution. Patch will only hold under the tread area.
Most tire shops won't touch anything with a sidewall puncture because of the liability/risk.
 
Yes.....

Wait....I will plug any tire anywhere to get me home. Slow ryde but you don't get much help where I ryde and it will hold till then. On a motorcyle I would not go long on a plugged tire especially the rear one. I have done some strange things to tires to keep going growing up in a third world where you don't get sued for waking up. In this case I would change the tire. By the way no shop will plug a tire car or otherwise....:lecturef_smilie:
 
Never Never Never NEVER

NEVER plug a tire in the sidewall
if you do, be sure your life insurance
is paid up for your next of kin...
Always Ride Safe
Dave

Have a small puncture and was considering plugging it. But as I've never done it before (but understand how its done), I just want to make sure the location of puncture should be plugged or tire replaced?
attachment.php
 
Like others have stated I would not attempt repairs. That is to close to the sidewall. Temp repair to get home maybe but that's all. Looks like a new tire is in the picture now..

Good Luck!
 
The answer to this is simple. if you need to plug it to get you to a safe place, do so, but drive slowly and carefully and replace the tire as soon as you get to the safe place, if you are at a safe place, replace the tire.

Cruzr Joe
 
Thanks

Thanks for all your input, taking it in to get replaced on Monday. Only reason I even considered plugging was I just put 3 new tires on last month, hehe. O well, fronts aren't that bad. Thanks again.
 
Al,
Would you please remind him of your qualifications? :thumbup:

My qualifications?, i am your average tire guy and most of the cars we work on are high end euro's. i also
have been in the biz for over 30 years and am road force certified as all my employees must be.
besides that i am a spyder schnook that takes no chances when it comes to safety.
 
Back
Top