• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

IS THERE TOE-IN ADJUSTMENT ON THE RT-S ??

CapNCrunch

New member
2012 RT-S .... Looks like there are adjustment points on both tie rods. Are those for adjusting the toe-in? My dealer told me the toe-in should be zero degrees (straight ahead). I'm going in for the 3,000 mile service, and would like to know.

CapNCrunch
 
2012 RT-S .... Looks like there are adjustment points on both tie rods. Are those for adjusting the toe-in? My dealer told me the toe-in should be zero degrees (straight ahead). I'm going in for the 3,000 mile service, and would like to know.

CapNCrunch

Yes and I believe you'll find the adjustment is from 0 to 1/16"
 
The toe-in on all Spyders is adjustable. The original spec was zero with the Spyder sitting on the ground...but more seems to be of benefit, especially with a heavy rider, a passenger most of the time, and/or a heavy cargo load. The toe-in is specified to be adjusted with the wheels off and the Spyder in the air. The spec for the RTS is -10 mm under that procedure. Again, this may have to be modified depending on circumstances. The change in toe-in as the suspension on an RT is loaded is a problem that has been difficult to deal with with any uniformity. JMHO
 
The toe-in on all Spyders is adjustable. The original spec was zero with the Spyder sitting on the ground...but more seems to be of benefit, especially with a heavy rider, a passenger most of the time, and/or a heavy cargo load. The toe-in is specified to be adjusted with the wheels off and the Spyder in the air. The spec for the RTS is -10 mm under that procedure. Again, this may have to be modified depending on circumstances. The change in toe-in as the suspension on an RT is loaded is a problem that has been difficult to deal with with any uniformity. JMHO

Good point. Every other vehicle I've ever done alignment on was at ride hight (basically the vehicle sitting on the ground, wheels on of course). I wonder about doing an alignment with the vehicle in the air. This is a configuration that you're never going to actually operate the vehicle in. Except maybe for Forrest and his Ditch Jumping forays.
 
Back
Top