Is there a Key Blank available for 2014+ Spyders?

[WisconsinDavid]

I have a 2014 RT (new to me) and have only 1 key. I am planning to disable DESS because of the many that have experienced problems and secure the bike with locked handlebars on trips, rather than being stranded with the DESS error. Is there a blank key available that is unchipped, to work with the other locks and also the ignition? I have not been able to find info on 2014+ key blanks. I have also read that earlier Spyder key blanks are not long enough to operate things correctly. Thanks for the help. Almost riding season in Wisconsin! Yay!!

 

[Bfromla]

ILCO X270 blank at most hardware shops that cut keys. Some have beveled the edge so key will push in deeper to turn. Personally did not have to.

 

[helton61]

Ace hardware had one works good.

 

[WisconsinDavid]

Thank you

 

[2dogs]

The blank that fits your Spyder is a Triumph key. And yes, you have to grind off the shoulders of the key to make it so it will go all the way in. I'm not familiar with the handlebar locking because I've only used it once. However, turning the handlebars lock to lock on a blacktop parking without moving the Spyder at the same time is a total PITA for sure.

 

[JayBros]

Here is a picture of the Ilco X270 key that I beveled to allow me to do everything on my Spyder but start it,

 

[Snoking1127]

It is a Triumph motorcycle key. I have one for each of my Spyders, one is on my keyring that is always in my pocket depending on season/location. If I lose my "running" key, the third key gives me access to the 2nd back up key.

 

[Bfromla]

“ valet” key

 

[LongIsland]

I had one made up at Ace Hardware. I needed it when I sold my 2014 RTL so that I could still unlock my RT-622 trailer.

 

[iSilentP]

Ask locksmith for Ilco x80 or vl6 blank.

 

[Snoking1127]

The blank I used.