-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Install Corbin Seats
- Thread starter cwhcwh
- Start date
VIspyderman
New member
ataDude
Mod Maniac
Ah, ha... you got them OK?
Pretty easy, BTW. The one little fitting (in the plastic bag with the keys) goes in the rear mount where the back end of the "shock absorber" used to go. The rear seat plugs in under the front and into the stepped pin that sticks up from the fitting mentioned above.
The front seat mounts with the two body bolts (14mm?) that you'll see once the stock is removed. Lay the Corbin front down on the frame, extend the hinged part to the rear, and you'll see those two bolts.
Leave those two bolts a little loose while your fitting the locking pin. It can be raised or lowered to latch the seat. Once the latching is adjusted, snug the two 14mm bolts down all the way.
