How to slide rear end over in garage?

[pitzerwm]

Here is a perfect case where necessity was the mother of invention. Sad if he is "gone"

 

[Bumblebee67]

I found this on eBay. It's a Can-Am Spyder dolly.



http://www.ebay.com/itm/301675223875?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT

 

[purplepig]

Wow did this work!

Just use 2 pieces of a 'crazy carpet' (that is the sheet of nylon they sell to slide on snow) . Place one on top of the other, and just push the rear towards the wall. If you want it even easier, spray a bit of silicone between the 2 pieces, but be careful. It will be very slippery... voila!!!

Thank you so much for this idea. It works perfectly! My wife thanks you as now she can get of her car in the garage! Dan

 

[GA-SPYDER]

Two pieces of galvanized sheet metal about 1 ft X 2 ft .....place them on top of each other....put a stick where you want the rear tire to stop......you should be able to slide the Spyder over because the metal sheets are slippery........Mike :thumbup:

That would definitely work:thumbup: Just don't forget that it's under the back wheel when you back out. I could see that sheet stuck in the wall, or in one of the front tires if you got a little heavy handed with the clutch and throttle. Just saying.........

 

[SPYDERGUY1]

cheap and easy, a peice of round wood doweling cut to your size dimensions, drive /back up on it and a kid could push it sideways, even 2 or 3 peices are better, WORK SMARTER NOT HARDER. Rember to place lengthwise with the tire or you will be moving front and back.

 

[hillrider]

Nylon furniture skid pads from Lowe's/Home Depot. The BIG ones.

 

[Dan McNally]

Harbor Freight has these on sale - get with another Spyder owner and split the cost of three sets, giving you each three of them. http://www.harborfreight.com/2-piec...zIjoiMzkuOTkiLCJwcm9kdWN0X2lk IjoiMjEzMSJ9

 

[Vader]

Harbor Freight has these on sale - get with another Spyder owner and split the cost of three sets, giving you each three of them. http://www.harborfreight.com/2-piec...zIjoiMzkuOTkiLCJwcm9kdWN0X2lk IjoiMjEzMSJ9

That's what I have for the front tyres,, then a small wooden dolly from HF for the rear. Works great

 

[2Paw]

Harbor Frieght also has this

with a coupon could be an option http://www.harborfreight.com/1250-lb-Capacity-Vehicle-Positioning-Wheel-Dolly-61917.html

 

[coz]

Try this

:roflblack::roflblack::roflblack::roflblack::roflblack:




Great signature 2 Paw !

 

[Gman2201]

I found this on eBay. It's a Can-Am Spyder dolly.



http://www.ebay.com/itm/301675223875?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT

Just purchased from eBay to move my RT around the garage.
thanks for the heads up on this bumblebee67.