Chupaca
New member
For those using the Hindle exhaust you may notice the rivets rattle loose. On the heat shield if you drill out the rivet and use a 6x1mm tap you can replace the rivet with a bolt. 
on the body close to the shield you can drill out the rivets and tap them with an 8-32 and use 8-32x 3/4" stainless allen head with washer and red loctite.
This works much better and easier to replace..
Easy fix if you have the tools but any shop can do it for you. All parts available at Home Depot...:thumbup:
on the body close to the shield you can drill out the rivets and tap them with an 8-32 and use 8-32x 3/4" stainless allen head with washer and red loctite. This works much better and easier to replace.. Easy fix if you have the tools but any shop can do it for you. All parts available at Home Depot...:thumbup:
Last edited:
