Highway Peg Brackets are in

[Lamonster]

These are made a little thicker and are now one piece. :bigthumbsup: I might see if I can get them installed tonight. :doorag:

 

[Rando]

I would like to purchase a pair.

 

[smokster]

please let me know how we can get these and how much they are.
Thanks
smokster

 

[spyder13]

I will buy a pair too!!!!!!!!!! Please contact me Lamonster

 

[Lamonster]

Well the right side is done. Start to finish was 40 min. so figure about an hour. :doorag:

 

[Lamonster]

About 30 min. for the left side but I would add another 30 min. to drill one hole and notch the plastic. :doorag:

 

[Lamonster]

please let me know how we can get these and how much they are.
Thanks
smokster

Looks like they should be back from the powdercoating in two weeks and then they should be ready to ship. Rob has them priced right at $85.00 plus shipping. :doorag:

 

[billclemen]

I need a pair. What do I need to do to get a set?
Wm Clements

 

[TMehaffey]

Lamont,
I would like to order a set also.
What do I need to to do to send payment?

 

[wildwillie]

Lamont are you welding that plate on or using bolts? If bolts are the holes there or do we drill them?Put me down for a set when they come in.wildwillie

 

[Lamonster]

Lamont are you welding that plate on or using bolts? If bolts are the holes there or do we drill them?Put me down for a set when they come in.wildwillie

The right side uses two existing holes, the left side has three bolts and you do drill one hole because the existing hole is too far apart.

I'll be doing install message on the board with a link so you can order them right from the guy making them.

Left side


Right side

 

[jeuchler]

For those of you who like the look of Lamont's Kuryakyn widow pegs, Cruisercustomizing has them on sale for $80.96, ending today (Sunday).

Anyone see a better deal?

http://www.cruisercustomizing.com/detail.cfm?model_ID=0&Category_ID=54&manufacturer_ID=16&product_ID=24964&sblid_name=Kuryakyn_Widow__Pegs_without_Adapter__Pair____Metric_Cruisers

 

[Lamonster]

With the right adapter you can use any Kury peg or board. :doorag:
http://www.directlineparts.com/byProduct.asp?prd=Pegs+&+Floorboards&sub=Pegs&str=290

Just the peg from DLP is $80.99 and the part number is Kur-4492
http://www.directlineparts.com/product.asp?pid=6753&str=290

If you want the Widow peg with adaptor for the drivers peg you need a Kur-44927939 and the price on that with the correct adaptor is $98.98 from www.DirectLineParts.com

The part I used to bolt to the peg bracket is Kur-8061
http://www.directlineparts.com/product.asp?pid=6951&str=290
and peg Kur-4491, this has the male mount on the peg.

 

[jeuchler]

...The part I used to bolt to the peg bracket is Kur-8061
http://www.directlineparts.com/product.asp?pid=6951&str=290
and peg Kur-4491, this has the male mount on the peg.

Thanks, Lamont, I was gonna ask you that.

I just now ordered a pair of those Kur-8061's from Directline (while I wait for those nice brackets to be run!) and was wondering which model number of the pegs you put on for the passenger? Are they the same ones as for the driver?

 

[Lamonster]

Thanks, Lamont, I was gonna ask you that.

I just now ordered a pair of those Kur-8061's from Directline (while I wait for those nice brackets to be run!) and was wondering which model number of the pegs you put on for the passenger? Are they the same ones as for the driver?

I just tried the pegs on the rear and it has some issues. The back of the peg on the passanger side is about 3/16" longer than the drivers peg and any of the Kury adapters out there that I know of. It can be done but it will take adding a 3/16" plate to the Spyder bracket.

 

[jeuchler]

Huh.

I wonder if one of their other pegs (that are a bit more like small boards) like the iso wing would do...?

http://www.directlineparts.com/product.asp?pid=1889&str=290&ID=871242813

 

[Lamonster]

Huh.

I wonder if one of their other pegs (that are a bit more like small boards) like the iso wing would do...?

http://www.directlineparts.com/product.asp?pid=1889&str=290&ID=871242813

Yes, all the adapters fit all their pegs and boards.

 

[jeuchler]

Woo-hoo!

My highway peg adapters came in today from DirectLine! javascript:void(0);

(Now I'm just waiting on my new Kury footpegs, my new highway peg bracket...Oh, yeah, and my Spyder.)

 

[Lamonster]

Got back from the powder coater sooner than Rob thought so as soon as I write some install instructions I'll have a link where you can order right from Rob. He's thinking the middle of next week they can ship. :doorag:

 

[jeuchler]

Got back from the powder coater sooner than Rob thought so as soon as I write some install instructions I'll have a link where you can order right from Rob. He's thinking the middle of next week they can ship. :doorag:

Awesome.


I ordered over the phone last week--they were real nice; I mentioned I found out about the part from Spyderlovers.com... :bigthumbsup: