I have a handbrake on my wifes 08 RS she don't like it on the right side she gives it gas when she brakes the master cylinder has a 22mm bore in it. Is there a clutch master that I could use to put it on the left side. I have looked at both the RS and the RTS clutch they look great but what is the bore size in them. Thank you for any help you can give
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Handbrake
- Thread starter spyder_RT
- Start date
NancysToy
Motorbike Professor
I get nervous when people talk about switching around control positions...unless they have no choice. Better to learn to use it in the normal location (for other motorcycles). This problem is usually a combination of the lever being tilted down too far, the lever being out too far...and sometimes small hands. You might try tilting the lever back a bit further first, and adjusting the lever position if it is adjustable...or replacing the lever. Be absolutely sure you need this mod, before you leap off that bridge. Best of luck resolving the problem.
