• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

GS 2008 Brakes

obiwanbill

New member
Since I've owned this 2008 GS SE5 (bought new) the brakes squeal when bike in reverse. Asked several shops over the years and their usual answer is "we don't know why, but it seems to be typical".

Any better guidance out there?:gaah:
 
Since I've owned this 2008 GS SE5 (bought new) the brakes squeal when bike in reverse. Asked several shops over the years and their usual answer is "we don't know why, but it seems to be typical".

Any better guidance out there?:gaah:

I put springs on mine and also found the bolts that holds the pads on had a notch in them. For some reason they will make a notch and to me makes the pads run against the rotor. Mine are better, but does it ever now and then. I wished they would sell the replacement bolts by them selves. Have to buy the shoes to get them.
David
 
Well....

There are several reasons for that...:agree: the knotched hanger bolts...but the most common is brake dust accumulation. Simple green used to clean the pads and disc can help that...:thumbup:
 
That's also my story. A typical issue with my 08 GS. Most noticeable when going in reverse. After a rainstorm, even a bit worse. :yes:
 
Annoying !

Since I've owned this 2008 GS SE5 (bought new) the brakes squeal when bike in reverse. Asked several shops over the years and their usual answer is "we don't know why, but it seems to be typical".

Any better guidance out there?:gaah:


I had a 2008 GS and it squealed in reverse, changed the pads, polished the rotor,changed the bolts, used a no squeal product on the rear of the pads, chamfered the pads, still squealed. Reached the conclusion that is why the twin is so noisy, to hide the squeal.:joke: Look at it as a back up alarm and just ride forward! Enjoy the ride, you don't go far in reverse anyhow!:thumbup:
 
My 08 GS did that until last fall. My dealer replaced the rear pads and it hasn't squeaked since. I'm not sure how long it will last, but I'm enjoying it while it does. Lol
 
Back
Top