biker01red
New member
How to attach a Zumo 660 mount to a 2020 RT, what mount to use and how to route and attach the wiring .... need advice .....
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
GPS mount on a 2020 RT
- Thread starter biker01red
- Start date
JayBros
Well-known member
I do not know specifically about the 2020 RT bars but I understand they are very similar to the F3 design. In the BRP online catalog under GPS & Mounts there is a mount, PN 218400912, that is for the F3 bars. That mount is however for the Zumo 590 and the mount for a 660 is different, therefore, you may have to go to a third party manufacturer.
robhowen
New member
I suggest you get the online shop manual so you can see where the power connector is on the right side and figure out how to wire it up to your handlebars. It's not difficult at all. The online manual is available via eBay. You can also email [email protected] for more ordering information.
Rob
Rob
biker01red
New member
Yes, I checked that - part 219400992 - for the 2020, Cost was $254.99 and definitely a mount for the Zumo 590 or 595....
Thanks for your reply..
Similar threads
