GPS gasket part number?

[OverHillAndDale]

The GPS mount is held in place by 4 screws that go through a slotted rubber grommet (groove around the outside). I lost one installing my Kradellock. This is the same style grommet (but different size) that go through windshield.

I don't even know the name of these grommets and my google searches haven't come up with a similar part (grooved grommet, slotted grommet, grooved washer, etc). Other than use two small grommets - one on the outside of the mount and one on the inside, I haven't figured out to replace this ...thing.

Has anyone got a vendor/part number? I'm always amazed at how this forum always yields SOMEONE who knows this stuff.

 

[OverHillAndDale]

It looks something like this...

 

[jegarh]

Go to Lowes or Home Depot and look through their selection of screws, bolts, pins, grommets, spacers etc, etc drawers and see if you can find one that matches one of yours.

 

[spyderCodes]

If you are looking at this part for a 2014 RT Limited then there does not appear to be a gasket or O-Ring there.

 

[OverHillAndDale]

The diagram you've found doesn't appear to be in the area I'm discussing - I couldn't find an exploded diagram of the GPS mount itself.

This is the GPS mount which is held by 4 hex-head screws to two u-shaped connectors that swivel front to back.

 

[jcthorne]

The diagram you've found doesn't appear to be in the area I'm discussing - I couldn't find an exploded diagram of the GPS mount itself.

This is the GPS mount which is held by 4 hex-head screws to two u-shaped connectors that swivel front to back.

Those are garmin parts and come with the garmin zumo motorcycle mount kit. (BRP repackages the Garmin mount with a BRP produced bracket) Garmin does not have a sepreate listing for those grommets but you might call them.

 

[OverHillAndDale]

Those are garmin parts and come with the garmin zumo motorcycle mount kit. (BRP repackages the Garmin mount with a BRP produced bracket) Garmin does not have a sepreate listing for those grommets but you might call them.

You're correct, those are Garmin parts. But, so far they are re-directing me back to BRP.

I'm going to try jegerh's advise of looking in the parts bins for automotive at Lowe's and/or Home Depot and see if I can get close.

Thanks all for the advice.

 

[PaladinLV]

Afters several years on a Harley two of mine disintegrated from the Heat out here.

Those "parts" are NOT available from Garmin.

Like previously posted went to a hardware store (Ace) and bought a suitable grommet/washer to do the job.
Why they make a neoprene grommet that will deteriorate over time ???

AJ

Those are garmin parts and come with the garmin zumo motorcycle mount kit. (BRP repackages the Garmin mount with a BRP produced bracket) Garmin does not have a sepreate listing for those grommets but you might call them.

 

[OverHillAndDale]

In my next career as a motorcycle designer, I will have no black holes where parts can fall in and become completely irretrievable.

Last week I found a screw in a groove of my driveway. It was one that fell in a hole a year or 2 ago.


Sent from my iPhone using Tapatalk

 

[JayBros]

There is s separate Garmin OEM product support number, 855-607-2536. If you have not called and spoken to one of those techs I suggest you do so as they might be able to help.

 

[OverHillAndDale]

Thanks, I'll try them.


Sent from my iPhone using Tapatalk

 

[jcthorne]

You're correct, those are Garmin parts. But, so far they are re-directing me back to BRP.

I'm going to try jegerh's advise of looking in the parts bins for automotive at Lowe's and/or Home Depot and see if I can get close.

Thanks all for the advice.

The grommets are a part of Garmin Part Number 010-11270-03 motorcycle mount. Its a generic mount, not a BRP part.

 

[spyderCodes]

OH .... I thought you meant the Gear Position Sensor .... not the electronic thingy .....:roflblack::roflblack::roflblack::roflblack::roflblack::roflblack::roflblack::roflblack: