go pro ram mount

[wyliec]

Just in case you have a go pro and didn't know there was a ram mount:

http://www.gpscity.com/ram-mount-gopro-hero-adapter-with-b-ball-ram-hol-gopr.html

 

[Big Iron]

Gonna have to buy one of those tomorrow,,, now have to figure a way to mount it to my Spyder,,,,,,, hmmmmmmm!

 

[mooneych]

Go Pro?

OH!! :hun: It's a camera!

Just in case you have a go pro and didn't know there was a ram mount:

http://www.gpscity.com/ram-mount-gopro-hero-adapter-with-b-ball-ram-hol-gopr.html

 

[wyliec]

Gonna have to buy one of those tomorrow,,, now have to figure a way to mount it to my Spyder,,,,,,, hmmmmmmm!

I'm going to try this on the mirror stalk:
http://www.gpscity.com/ram-mount-yoke-clamp-base-with-1-inch-ball.html

And, then I'm going to see if I can mount this yoke to the center piece where the handlebars attach to mount a gps. I already have 5 ram mounts; just wanted another.

 

[Lamonster]

Good find, I just ordered two of them. :thumbup:

 

[Campverdefela]

I'm going to try this on the mirror stalk:
http://www.gpscity.com/ram-mount-yoke-clamp-base-with-1-inch-ball.html

And, then I'm going to see if I can mount this yoke to the center piece where the handlebars attach to mount a gps. I already have 5 ram mounts; just wanted another.

This mount has a max. of one and a quarter inch grasp, would that work on the mirror stalk?
[This might be better]
RAM Mount Description:
The ATV/UTV camera mount consists of a 1/4"-20 thread centered on a 2.5" diameter plate, strap clamp, 2 zinc coated metal u-bolts, custom high strength composite cradle and socket system. The strap clamp is long enough to wrap around circular rails, most commonly found on ATV's, UTV's, snowmobiles and motorcycles. This mount will accommodate rails from 0.5" to 3.15" in diameter.

Material:
High Strength Composite and Powder Coated Marine Grade Aluminum

Product Number:
RAM-B-149Z-2-202A

Retail:
$41.93

 

[wyliec]

This mount has a max. of one and a quarter inch grasp, would that work on the mirror stalk?
[This might be better]
RAM Mount Description:
The ATV/UTV camera mount consists of a 1/4"-20 thread centered on a 2.5" diameter plate, strap clamp, 2 zinc coated metal u-bolts, custom high strength composite cradle and socket system. The strap clamp is long enough to wrap around circular rails, most commonly found on ATV's, UTV's, snowmobiles and motorcycles. This mount will accommodate rails from 0.5" to 3.15" in diameter.

Material:
High Strength Composite and Powder Coated Marine Grade Aluminum

Product Number:
RAM-B-149Z-2-202A

Retail:
$41.93

I actually have a RAM u-bolt mount that is I believe 1 1/4" on the mirror stalk. I just think the yoke mount looks a little better and is an easier on/off to switch sides when I want.

The go pro doesn't have female threads like most cameras; I don't believe that will work.

 

[rogerb]

I have the suction base they show on the video. It is good quality. I got it from Amazon. I had my camera mounted to it when I did The Tail of the Dragon both ways with no problem. Compared to the ones that come with the GPS night and day. I ty-wrapped the GPS mount to my handle bars. Definitly a great find. Love this site. :2thumbs:

 

[wyliec]

I have the suction base they show on the video. It is good quality. I got it from Amazon. I had my camera mounted to it when I did The Tail of the Dragon both ways with no problem. Compared to the ones that come with the GPS night and day. I ty-wrapped the GPS mount to my handle bars. Definitly a great find. Love this site. :2thumbs:

I have the ram suction base also. And, you are correct; it's much better than the one that comes with the gps. I use the ram suction base in my car.

 

[Campverdefela]

I actually have a RAM u-bolt mount that is I believe 1 1/4" on the mirror stalk. I just think the yoke mount looks a little better and is an easier on/off to switch sides when I want.

The go pro doesn't have female threads like most cameras; I don't believe that will work.

Couldn't this be used on the Goproand then mounted on the ATV Ram mount and the other ball taken off?

 

[wyliec]

Couldn't this be used on the Goproand then mounted on the ATV Ram mount and the other ball taken off?

Yes, if you mean the combination ball/flange/male thread end.

 

[rogerb]

Too many people read about the Ram Mount for the Go-Pro. If you order one you go on a backorder list. There must be a lot of Go-Pro cameras out there.