Gas door

[lou49]

This are it Mike finally got'em! This are not the ones on ebay!

 

[MOSESS]

Nice mod

I want to do this mod, please post the part number ill order this asap

 

[pitzerwm]

That is the Dodge one, about 6" in diameter. That is what I installed.

You can get the same thing on Ebay too.

 

[Charlotte17078]

Gas Door

Do you have a picture of one that has been installed?
Thanks!

 

[lou49]

Do you have a picture of one that has been installed?
Thanks!

Have not even bought this gas door! This questions can better be answer by the one and only, Bluemike911

 

[lou49]

That is the Dodge one, about 6" in diameter. That is what I installed.

You can get the same thing on Ebay too.

I've been talking to Bluemike911 and he said that on the this one, the opening for the gas cap is too small if you have big hands! I have big hands! This is the eBay # for the one he recommended! 262324387971

 

[Myron Ah]

Gas door.

The dodge one is the one I used. DIYed it. There is a picture here in one of my posts. I can't get to this one.:banghead::banghead::banghead:

 

[pitzerwm]

Do you have a picture of one that has been installed?
Thanks!

Here is the entire project: http://www.spyderlovers.com/forums/...Nothing-spectacular-just-making-it-mine/page2

Mike is mistaken, I have large hands and even without the cap extension you can get the cap in & out. Pay attention to the suggestion to move the door to the front and up a bit.

This what you can type in Ebay:
BLACK BOLT-ON GAS FUEL TANK DOOR COVER+KEY/LOCK FOR 09-16 DODGE RAM 1500-3500

 

[BLUEKNIGHT911]

gas door --------------------COVER

Here is the entire project: http://www.spyderlovers.com/forums/...Nothing-spectacular-just-making-it-mine/page2

Mike is mistaken, I have large hands and even without the cap extension you can get the cap in & out. Pay attention to the suggestion to move the door to the front and up a bit.

This what you can type in Ebay:
BLACK BOLT-ON GAS FUEL TANK DOOR COVER+KEY/LOCK FOR 09-16 DODGE RAM 1500-3500

If you type in the word " cover ", that is exactly what you may end up with " a cover "........and this will " cover " an OEM gas door..............so it may be a flimsy piece of tin and not a sturdy " DOOR ", and if you get something that isn't STURDY, this project will not work....... Mike :bbq:

 

[pitzerwm]

This one was/is 1/8" thick, but yes read the description very careful, on any Ebay/Amazon purchase. This one doesn't say the thickness, but you can see thru the pixs that it isn't junk. Someone else got this one and so I was comfortable ordering this one.

 

[MrBones]

Mike I took your advise and just wired my seat lock open so don't have to use the key to gas up. Works great for me. Don't know why the seat door is needed. Thanks for the wire advise.

 

[BLUEKNIGHT911]

BECAUSE

Mike I took your advise and just wired my seat lock open so don't have to use the key to gas up. Works great for me. Don't know why the seat door is needed. Thanks for the wire advise.

I think you will be better off not having to use the ignition switch..................Some people carry BACK-PACKS etc. on the passenger seat for extra capacity when travelling. The GAS DOOR lets them get gas without having to take all their stuff off to do this ........Mike :bbq: