Fuse block location '13, '14 RT

[IdahoMtnSpyder]

Has anyone found a convenient place to install a fuse block, like the FZ-1 Fuzeblock from Tricled, on a '13 or '14 RT? The space under the headlight that was a good spot on the '12 and earlier bikes is no longer available because the battery jumper posts are there. I added several connections to the battery jumper posts, but that really isn't the greatest way to connect additional accessories.

 

[samewok]

Box

Reggy installed mine in the funk. He but it as you look from the front of the bike it is on the right side.

 

[IdahoMtnSpyder]

Reggy installed mine in the funk. He but it as you look from the front of the bike it is on the right side.

You mean inside the frunk where you carry stuff? How did he fix it where the wires come through the frunk wall so it doesn't leak water?

 

[larrymz3]

Can we see a pic?


Sent from my iPad using Tapatalk HD

 

[Tango]

Mine is mounted under the seat. Easy to get at. :thumbup: Tom :trike:

 

[Phil]

I put mine in the same place on my 2010 & 2014-- take off the covers behind the frunk. On the left side (driver's view), there is an empty area. I use this one- http://www.fuzeblocks.com and it fits nicely in that blank area. I do not suggest securing it. Make it easy on yourself to pull it out to easily get to the fuses.

Phil, Tyler TX- from my iPad 7.5 using Tapatalk HD

 

[cbell1]

The '13 RT and the '14 RT are not the same in this instance. I did not find a good location on my '13 RT but my '14 RT seems to have multiple areas as in 1.) the area behind the left Side Panel and 2.) the area under the left Service Panel(the area that Phil mentions).

 

[bluestratos]

On the 14 I built a much larger custom set up and it is mounted behind the left (as you sit on the bike) access panel where the old oil reservoir tank was, it would not work on the 13 if I recall.