-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Frunk won't open...SUGGESTIONS??
- Thread starter gman214
- Start date
BLUEKNIGHT911
Sadly Passed Oct 2024 - RIP
HOW TO OPEN FRUNK
I posted to a member awhile back ....exactly How To open any GS - RS frunk .... I'll see if I can find it ....... Mike :thumbup:
BLUEKNIGHT911
Sadly Passed Oct 2024 - RIP
HOW TO OPEN FRUNK - con'td
Sorry but among my other shortcomings :banghead: I can't do LINKS ....... But good news I found my written instructions which another member used and it worked great ..... In the search box above type ( in capitals ) STUCK FRUNK .... when the answers pop up ... the fourth one down from spyd-man (?) is the Thread .... go to that and my post is # 15 ... it worked for Him ...... good luck ..... Mike :thumbup: ........ PS the plastic hood is a lot stronger than you think, so you don't need to worry it will break :gaah:..... unless you try to go 6 inches plus ......:lecturef_smilie:
Sorry but among my other shortcomings :banghead: I can't do LINKS ....... But good news I found my written instructions which another member used and it worked great ..... In the search box above type ( in capitals ) STUCK FRUNK .... when the answers pop up ... the fourth one down from spyd-man (?) is the Thread .... go to that and my post is # 15 ... it worked for Him ...... good luck ..... Mike :thumbup: ........ PS the plastic hood is a lot stronger than you think, so you don't need to worry it will break :gaah:..... unless you try to go 6 inches plus ......:lecturef_smilie:
cmbspyderrss
New member
FRUNK Link
Here you go
http://www.spyderlovers.com/forums/showthread.php?87902-Frunk&highlight=STUCK+FRUNK
Here you go
http://www.spyderlovers.com/forums/showthread.php?87902-Frunk&highlight=STUCK+FRUNK
Bandera
Member
same thing happened to me.
I bought a cheap set of mixing spoons with the long round handle. If you slide the handle between the lip of the frunk toward the latch, you can catch the release. This happened to me a couple times, so I always travel with a mixing spoon with a long round handle.
Michael
I bought a cheap set of mixing spoons with the long round handle. If you slide the handle between the lip of the frunk toward the latch, you can catch the release. This happened to me a couple times, so I always travel with a mixing spoon with a long round handle.
Michael
could be a bad ignition switch
I had sporadic problem getting frunk to release and to relatch on my 2014 RT-S recently. The ignition switch was eventually replaced under warranty. In the mean time, the tech instructed me to put the key in the ignition and give it a quick, sharp rap to activate the frunk mechanism. It worked well until I could get the switch replaced.
I had sporadic problem getting frunk to release and to relatch on my 2014 RT-S recently. The ignition switch was eventually replaced under warranty. In the mean time, the tech instructed me to put the key in the ignition and give it a quick, sharp rap to activate the frunk mechanism. It worked well until I could get the switch replaced.