About 2 weeks ago, my toggle switch for my Frunk stopped working. The parking brake engages fine... But when I press down on the ffrunk toggle switch, it does nothing. It will open fine with the key. The rubber lining is iin the right place, the latch closes just fine. Has anyone had this problem before, or are there any possible suggestions or fixes? It's a 2010 RT-S by the way...
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Frunk toggle switch
- Thread starter Ryblueyez
- Start date
fastfraser
Blazing Member
When you stand in front of your Spyder with the frunk open just to the left of center at the top of the frunk there is a switch ,a small flat metal strip that when you push down on it you should here a click. Is it there, is it bent, does it click .
Yes, it is there and it is flat. I will check on the clicking sound when I get off this afternoon. I know that yes terday the plug that goes into thatmetal prong had came loose. I took some needle nose and pushed it back snug though, thinking that may fix the problem. Didn't have any luck though
MidLifeCrisis
New member
Mine did that and the dealer adjusted it. Strange part is I couldn't hear anything click, but they said it was a stretched cable and an adjustment did the trick.
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD
murphybrown
New member
For me $75 fix
Had a "thingy" break that control that toggle. My dealer ordered in and they fixed...$75 but I have BEST warranty so it was a $50 (deductible) fix. :yes:
Had a "thingy" break that control that toggle. My dealer ordered in and they fixed...$75 but I have BEST warranty so it was a $50 (deductible) fix. :yes:
Indyron
New member
Even on a 2010?
murphybrown
New member
Sonrisa
New member
I had the same problem with my 2010 RTS. It was the switch and it was replaced under warranty. I also have the same exact problem with my new 2013. These switches must not have a very good quality control. As was said earlier, if your warranty has expired you will have to eat the costs.:banghead::banghead:
NancysToy
Motorbike Professor
Position Sensor - P/N 710001861 - MSRP $14.49 ...if the problem is the trunk microswitch. Hard to estimate the labor...depends on the dealer.
Similar threads
