frunk latch

[arvoaussie]

Okay no clue why or how but frunk latched shut and will not open. All clues and suggestions appreciated.

 

[NancysToy]

Try pushing down on it while you turn the key release. It may take two people. If there is cargo pushing back on the lid, they can do this. If not, it may need adjustment and/or lubrication.

 

[arvoaussie]

Electronic release. Tried engine on engine off really stumped ...was wondering if maybe a manual release hidden somewhere

 

[NancysToy]

Electronic release. Tried engine on engine off really stumped ...was wondering if maybe a manual release hidden somewhere

They all have a manual release. Push the ignition key straight down, then turn counterclockwise. Your manual explains this. The 2010 will not release electronically without the engine running...not just the key turned on. The 2011 releases with the key on. If yours does not release electronically, it needs to be lubed and adjusted by the dealer.

 

[Bob Denman]

Scotty's right on the manual process... Did you load the frunk up enough that something is exerting some outward pressure against the lid? (That's why pushing down on it might help take the pressure off and allow it to release.)

 

[Questions]

Boot catch will not release

Hi, can any one help me, my boot lid on the RTS will not release and I have tried numerous pushing banging etc but nothing works, I there any way to gain entry without damaging the lid?

 

[NancysToy]

Hi, can any one help me, my boot lid on the RTS will not release and I have tried numerous pushing banging etc but nothing works, I there any way to gain entry without damaging the lid?

Are you talking about releasing manually, electrically, or both? Also, what year RTS...it makes a difference.

 

[MouthPiece]

A technique that was used by my dealership when I had latch problems was to gently move the frunk lid back and forth sideways and have someone do the "key turn" release method. There should be just a little play that allows you to move the frunk sideways. I might add that my latch issue was solved by replacing it with a new latch assembly under warranty.

Chris

 

[SpyderDen]

My '11 RTS wouldn't open with the "key method" but would open with electronic switch. Required a replacement cable for the key switch.

 

[Spyder#353]

I have an appointment for the rear trunk latch to be replaced tomorrow morning. Right now it dosen't stay latch even when it's locked.