• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

FREE INSTALL ON FRONT BALANCERS AT SPYDERFEST!

Lamonster

SpyderLovers Founder
FREE INSTALL ON FRONT BALANCERS AT SPYDERFEST!

Had to edit this post. We just got stock back in. The response has been great and so has the feedback.

We have another large order that should show this week and we'll be placing an order before Spyderfest to make sure we have good stock for our customers and our dealers.


If you plan on having these installed here at Spyderfest we'll be doing the front only at this time. We recommend you do the rear when you change the rear tire as the labor to do so is about the same. You just pull the rotor and install the balancer on the hub and reinstall the rotor.


Lamonster Garage believes in this product, worked for over a year to bring this to market and become the distributor for this product. We have more combined miles testing this product on the Spyder before bringing it to market than any other product we sell. Just last week Joan and I rode about 1500 miles each on some really bad roads with great results. Vibrations you didn't even know you had will be gone. Hope to install your set at Spyderfest.
Share with your Spyder friends that plan on being here!
http://www.lamonstergarage.com/lamonster-approved-wheel-balancers-full-set/


IMG_2252__44130.1490016767.1280.1280.jpg
 
Balancers

Hey Lamonster I just put these on my 2012 RT and I had to shim my brake calipers in order for these to fit. Have you had any problems with this? They seem to work just fine now. The instructions didn't say anything about shimming for clearance.
 
I think what Ryan12 is attempting to let everyone know is that with some shims he was able to make them work on the 14" rims too.

Some photos of your installation (without the wheel) would be great for others to learn from.
 
SpyderFest usually falls right about the last week of April/First week of May... (Springfield, MS)
SpyderQuest lands about a week after Labor Day... (Lake George, NY)
 
Back
Top