Fog Lights

[bmccaffrey]

Just installed Lamonster fog lights on my F3 Limited. There us a gap all the way around the lights. I would assume this is normal being there is no bezel trim to go around it.

 

[SPYD3R]

YUP..... u r rite 'bout dat....

here's what i did to fill the void....
i used a couple empty Spray Paint Cans... surgically removed the tops, cleaned them really good, painted them black, then added the orange... made 2 plexi-glass lenses, RTV'd them into the paint cans, and fit them into the voids... cleans thing up a bit...

Dan P
Easley, SC

 

[Yabbadabbadoo]

Interesting, I might do something similar. I don't know about the need for the plexiglass. What brand/color orange paint did you use? I have an SS too.

 

[bmccaffrey]

YUP..... u r rite 'bout dat....

here's what i did to fill the void....
i used a couple empty Spray Paint Cans... surgically removed the tops, cleaned them really good, painted them black, then added the orange... made 2 plexi-glass lenses, RTV'd them into the paint cans, and fit them into the voids... cleans thing up a bit...
View attachment 181400 View attachment 181401 View attachment 181402
Dan P
Easley, SC

What holds them on Dan?

 

[jiffy]

I just drilled my old cover with an appropriate size whole saw and finished with a dremel. Spyder 2019 (2).jpg (45.5 KB)

 

[SPYD3R]

BMC & YABADABADOO....
they are secured via 'clear' RTV....
as for paint, i went to my local auto paint supplier store, and they used a spectrometer and matched the color from 1 of the A arms....
and NO, the plexiglass lenses are NOT needed, i just wanted them...
good luck every1....
Dan

 

[Yabbadabbadoo]

Thanks for following up!

 

[OK-DZ9R]

Original BRP light bezzels are available for about $8 apiece. They fit up just like the blanks. I got mine from Cheap Cycle Parts.