Floorboards

[NewHornist]

I have an 2015 F3-S. Does anyone make floorboards that can be mounted in addition to the pegs? I like my foot position and that I can raise and lower my heel relative to the brake on the peg but I also need something to rest my feet, get on and off the bike, and be able to stand up and shift my position like I did on my RT.

 

[murphybrown]

Sealfloorboards....

John, designer/owner of Seal Floorboards may have what you need. His floorboards are wonderful. He is also a Spyderlovers site sponsor. :thumbup:

 

[TommyBwell]

I have the factory foot boards and you can leave the pegs on with them (in a different hole of course). They are a great addition. I use my passenger pegs to get on and off.

 

[NewHornist]

I have the factory foot boards and you can leave the pegs on with them (in a different hole of course). They are a great addition. I use my passenger pegs to get on and off.

Thanks! By a 'different hole' you mean attaching the floorboards to the hole behind the foot peg hole? My brake / foot peg are in position 2 right now. This would put the floorboard in the hole for position 1. There must be (I think) two attachment points for the floorboards. Where is the 2nd one?

 

[Bob Denman]

How about Lamont's R.I.P. floorboards, and his mid-pegs? :dontknow:

 

[Lamonster]

This is what we offer and it makes it easy to get to the brake without lifting your foot.

http://www.lamonstergarage.com/floorboards/

 

[NewHornist]

How about Lamont's R.I.P. floorboards, and his mid-pegs? :dontknow:

I watched his installation video and he takes the peg by the brake off. The center peg is a possibility but I hope to find a floorboard solution.

 

[NewHornist]

This is what we offer and it makes it easy to get to the brake without lifting your foot.

http://www.lamonstergarage.com/floorboards/

I am aware of these and also the 3rd peg. If the 3rd peg was a bit wider it would be very close to what I am looking for. I'm leaning toward the 3rd peg because I really like using the peg by the brake. I like dropping my heel down to stretch my calf muscle. On the other hand, I loved the floorboards on my RT.

 

[SPYD3R]

HOME MADE - DIY

(i hope the pix flip 180 when i post this... they are now upside-down...)
YOU'LL ONLY SEE THESE IN THE WESTERN ENDS OF NORTH & SOUTH CAROLINA....
WHY? BECAUSE I MADE THESE AT HOME, AND TRIED ABOUT 6 VARIATIONS, AND I GAVE 5 SETS AWAY, AND NOW HAVE THE LAST SET THAT I MADE ON MY F3-S....
THESE ALSO ACT AS A 'SPLASH BORD', THEY KEEP US SOMEWHAT DRIER WHILE RIDING IN THE RAIN OR WET ROADS... I POSTED THE 4 PIX SO THAT YOU COULD SEE THE VARIOUS FOOT POSITIONS, ALSO, I'M 250 LBS, AND I CAN STAND UP ON THESE... THESE ARE PAINTED 'PRIMER' BUT ARE NOW BLACK WITH THE CAN AM RED (CHEVY ORANGE) SIDE EDGES....
I WOULDN'T LEAVE HOME WITHOUT THEM....
DAN P
EASLEY, SC
SPYD3R

 

[Firefly]

View attachment 144072 View attachment 144073 View attachment 144074 View attachment 144075 (i hope the pix flip 180 when i post this... they are now upside-down...)
YOU'LL ONLY SEE THESE IN THE WESTERN ENDS OF NORTH & SOUTH CAROLINA....
WHY? BECAUSE I MADE THESE AT HOME, AND TRIED ABOUT 6 VARIATIONS, AND I GAVE 5 SETS AWAY, AND NOW HAVE THE LAST SET THAT I MADE ON MY F3-S....
THESE ALSO ACT AS A 'SPLASH BORD', THEY KEEP US SOMEWHAT DRIER WHILE RIDING IN THE RAIN OR WET ROADS... I POSTED THE 4 PIX SO THAT YOU COULD SEE THE VARIOUS FOOT POSITIONS, ALSO, I'M 250 LBS, AND I CAN STAND UP ON THESE... THESE ARE PAINTED 'PRIMER' BUT ARE NOW BLACK WITH THE CAN AM RED (CHEVY ORANGE) SIDE EDGES....
I WOULDN'T LEAVE HOME WITHOUT THEM....
DAN P
EASLEY, SC
SPYD3R

What did you attach these to?

 

[Bob Denman]

:shocked: Dan...
Were you walking on the ceiling, when you took those pictures? :roflblack:

I spun them, so you can get some blood flowing back into your brain... :thumbup:

 

[SPYD3R]

TRIED

:shocked: Dan...
Were you walking on the ceiling, when you took those pictures? :roflblack:

I spun them, so you can get some blood flowing back into your brain... :thumbup:
View attachment 144077View attachment 144078View attachment 144079View attachment 144080

BOB;
THX A TON....
I TRIED EVERYTHING I COULD TO FLIP THOSE PIX n NOTHING WORKED.... THX THX THX....
DAN

 

[TommyBwell]

Thanks! By a 'different hole' you mean attaching the floorboards to the hole behind the foot peg hole? My brake / foot peg are in position 2 right now. This would put the floorboard in the hole for position 1. There must be (I think) two attachment points for the floorboards. Where is the 2nd one?

The BRP boards have one mounting point. You would put the pegs in the one hole. I have not done it but there was a thread about it.