Fitting '19 Max Mount to '22 Ryker - what am I missing?

[bunke]

I purchased a max mount that was on a 2019 Ryker Rally for my 2022 900 ACE. I looked up the part numbers and they matched, so I thought there would be no issue. I tried to mount it today and the bolt holes are about 1/4" off. I couldn't see anything preventing it from sliding the entire way in. The max mount does have scratches and nicks, but it didn't seem bent at all. Am I missing something or am I not seeing where it could be bent?

Any thoughts would be appreciative.

 

[Peter Aawen]

I don't think you're missing anything..... except for you to realise that BRP's quality standards aren't quite as high as might be expected, especially on the Rykers.... :banghead:

Sorry :sour:

 

[DickB]

Can you bolt it one one side and not the other?

 

[EchoVictor]

When I installed my Passenger Seat footpegs on my '22 Sport, I had issue fitting the spacer on one side into the appropriate gap on the max mount. So, the casting doesn't seem to be that dimensionally stable. I'm with Peter.... seems to be not the best QC on this part.

Later,
EV