3 Wheel Rider
New member
Same here.. thought the reflective stripes looked just like ZX14 markings. Looks good
Last edited:
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Finally got a picture of my new bike.
- Thread starter always young
- Start date
Same here.. thought the reflective stripes looked just like ZX14 markings. Looks good
ofdave
New member
entire thread on it
http://www.spyderlovers.com/forums/showthread.php?107457-Handlebar-Riser-Kit-for-F3
I'd ask about the 4", that may present cable/wire issues
always young
New member
Rod Risers
I have the 2 inch risers but should have gone with the 2 1/2 inches. With the 2 inch, I had to replace the socket head screws with hex head bolts, clearance issue for tightening. The cables are long enough, just couldn't install the cable retainer screw closest to the center. Can't tell the difference without it. I need to take mine off over the holidays to add a piece of foil tape to the Rox end of the clamp as it is slightly undersize and slips some. Easy fix. I like the attitude bars as they have a more cruiser shape and are more comfortable to me. With the riser they come back just right and I don't have to lean forward. I'm 5'9" with a 29" inseam.
Everyone out there have a very Merry Christmas and New Year and stay safe.
I have the 2 inch risers but should have gone with the 2 1/2 inches. With the 2 inch, I had to replace the socket head screws with hex head bolts, clearance issue for tightening. The cables are long enough, just couldn't install the cable retainer screw closest to the center. Can't tell the difference without it. I need to take mine off over the holidays to add a piece of foil tape to the Rox end of the clamp as it is slightly undersize and slips some. Easy fix. I like the attitude bars as they have a more cruiser shape and are more comfortable to me. With the riser they come back just right and I don't have to lean forward. I'm 5'9" with a 29" inseam.
Everyone out there have a very Merry Christmas and New Year and stay safe.
Similar threads
