Easy Rider
New member
so the entire bike can lean into the corners. .
NO. It takes a LOT more than that.
so the entire bike can lean into the corners. .
View attachment 160575With regards to the Spyder F3 can I switch the flat profile rear tire for a rounded one if available and setup the front/rear suspension with adjustable Elka shocks so the entire bike can lean into the corners. Honda came out with a Neowing prototype that offered this design but I don't see why this can't be adapted to the Spyder.
:agree::agree::agree:I just put the bar on, love it now I got to find some one in Maine that will do the laser alignment!!Many of us have had this same experience. There are a number of things you can do to your Spyder to make it handle like a go-cart. It is actually pretty amazing how much difference a few changes can make. Especially if you are riding 2 up.
This is the reason I started making the sway bar kit. I was very impressed by how it stabilized my Spyder in a number of ways. Not just in the curves as I'd expected. But in strong cross winds, when passing large semi's on the freeway, and more.
Upgraded shocks will also give you greater control over the Spyder.
Laser Alignment can also make a great deal of difference.
Don't give up. Your dream ride may be just a mod or 2 away! :thumbup:
I got my new F3 about 3 months ago. Asked the dealer to check alignment and he said no need it has been aligned.
Not too happy with the handling/cornering (especially on right hand bends) so I did my own laser alignment 2 days ago.
Left side was toed out 2mm, right side was toed in 4mm.
I adjusted to 1.5mm toe in both sides and I have a new ride. Unbelievable difference.
BTW, the inside lock nut on the left side is almost impossible to reach, without special tool. I removed the frunk and the battery and had easy access.
I have a new ride. Unbelievable difference.
Enough detail?
After putting some miles on my 2018 RT-L: it definitely feels "twitchy" at speeds...
Not minimizing others comments, but never could understand any of these poor handling comments.
And how exactly do you think that does NOT minimize the comments from others ???
I think it absolutely DOES. It is like saying that you don't really believe that there is a problem......that tons of other people are saying that there IS....for them.
Do you really NOT "understand" it ?? Or are you just trying to say that some people will find the different geometry a problem and others won't ??
Like thousands of other :spyder2: owners---- my :spyder2: handles great. Smooth and steady, no pulling or drifting out of the lane. Fast in the corners if I want to. It has Doc's spring stiffeners, anti-sway bar, General car tire at 19 # cold, and proper wheel alignment/balance. I've activated nanny a few times and found that smooth inputs really do help.
In higher speed turns, I believe a good technique is:
Push on the peg/floorboard with the outside foot.
Bend the inside elbow and lean forward and to the inside of the turn. I sometimes ( really fast) slide over to the inside of the seat.
Brace body with inside knee against the"tank".
I know it seems like a dance---- but watching a fast 2 wheeler on a very curvy road is a exercise of fluidity in motion.
Lew L
Don't be dissuaded by the negative comments of the few. The vast majority of Spyder owners aren't experiencing handling problems. A lot of the negative comments come from folks who spend more time on this forum than in the saddle.nojokeYou guys are scarring me ,with all this ill handling . I have not even got to do a test ride yet ( snow is still melting ) . I am trying to make a deal on a new 2016 RTL ,but still need a test ride . Got my first bike in 1968 ,and have never been without one since.