Fault code P0707

[skeetshooter]

Does anyone know what fault code po707 means.Thanks:dontknow:

 

[canam9]

Does it show you the code, or do you have a code reader?:ani29:

 

[groundeffect]

Does anyone know what fault code po707 means.Thanks:dontknow:

Did you pull that off the cluster?

Also, are you sure it is P0707, as I can not see to find it in the shop manual....


Cheers.

 

[skeetshooter]

I pulled it off cluster.It is the right #.THANKS:dontknow:

 

[Lamonster]

There is no P0707 listed. :dontknow:

 

[groundeffect]

I pulled it off cluster.It is the right #.THANKS:dontknow:

:dontknow:opcorn:

 

[irish2themax]

Does anyone know what fault code po707 means.Thanks:dontknow:

707? Maybe you're prepared for take-off?

 

[docdoru]

Can you please take a picture of the display with this error and posted here? opcorn:

 

[skeetshooter]

I will have to wait until it starts flashing again.Just does when its hot outside.I will try tomorrow when it gets about 95 and ride in stop and go traffic.Thats when it starts acting up.THANKS

 

[NancysToy]

707 upside down is LOL. Maybe your Spyder is laughing at the confusion it has caused? :joke:

 

[stormtrooper]

707 upside down is LOL. Maybe your Spyder is laughing at the confusion it has caused? :joke:

:roflblack: :roflblack: :roflblack: :roflblack: :roflblack: :roflblack: or maybe :spyder2: is laughing at you skeetshooter.:roflblack: :roflblack: :roflblack:

 

[M2Wild]

not reading reading it up side down on code 710?:roflblack:
:shemademe_smilie:

 

[groundeffect]

Can you please take a picture of the display with this error and posted here? opcorn:

:agree:

 

[LittleJohn]

Does anyone know what fault code po707 means.Thanks:dontknow:

Im a believer Skeetshooter!!!! I just got this code this weekend, and my dealer was stumped, as it didnt store in the ECM and show up on the BUDS.

Theyre supposed to call BRP tomorrow.
Did you ever find any relief on your issue?:dontknow:

 

[Marker]

Does anyone know what fault code po707 means.Thanks:dontknow:

Littlejohn just posted the same question for this fault code you need to see his thread opcorn:opcorn:opcorn:

 

[Neez]

There are 2 listings for PO730 in the manual, right next to the place where PO 707 would appear. The first of the two reads "gear position sensor in invalid range". I wonder if a typo error was made and the first PO730 should be PO707. May be worth checking out.

 

[tweeder]

Have you had the gear position sensor changed? That gave me the flashing indicator lights but no code.