F3 Windshield from F4 Customs status

[F4 Customs]

Folks, Here is an update for those folks that are waiting for the F4 Windshield for the F3. We have had some great results and the windshield is complete and the hardware is just about completed. The testing will be completed this week. The air flow is awesome.

The windshield will be manufactured in two different heights. We also will over clear or tint. One height you will be able to look over and the other you will look through.
The hardware is made in such a way you will have adjustability of these two windshields so you can tweak it just right.

I have attached some photo's for your preview and would like to have your opinions sent to donfrank@f4customs.com.

The shield is made from our High Optics Polycarbonate, Sheds Rain, and is Highly Scratch Resistant due to our patented coatings.
Starting June 8th we will be taking Pre-Orders for shipment approx. the end of June.

Thanks for your input
Don Frank
F4 Customs
330-968-4644

 

[one2doo]

Looking forward to try one.

 

[Mikind7]

Are these photos of the taller shield?

 

[MikeP]

Folks, Here is an update for those folks that are waiting for the F4 Windshield for the F3. We have had some great results and the windshield is complete and the hardware is just about completed. The testing will be completed this week. The air flow is awesome.

The windshield will be manufactured in two different heights. We also will over clear or tint. One height you will be able to look over and the other you will look through.
The hardware is made in such a way you will have adjustability of these two windshields so you can tweak it just right.

I have attached some photo's for your preview and would like to have your opinions sent to donfrank@f4customs.com.

The shield is made from our High Optics Polycarbonate, Sheds Rain, and is Highly Scratch Resistant due to our patented coatings.
Starting June 8th we will be taking Pre-Orders for shipment approx. the end of June.

Thanks for your input
Don Frank

F4 Customs
330-968-4644

Looks GREAT!!!! Will you offer the vented opinion like you do on your other shields???

 

[Wardawg]

Windshield

Folks, Here is an update for those folks that are waiting for the F4 Windshield for the F3. We have had some great results and the windshield is complete and the hardware is just about completed. The testing will be completed this week. The air flow is awesome.

The windshield will be manufactured in two different heights. We also will over clear or tint. One height you will be able to look over and the other you will look through.
The hardware is made in such a way you will have adjustability of these two windshields so you can tweak it just right.

I have attached some photo's for your preview and would like to have your opinions sent to donfrank@f4customs.com.

The shield is made from our High Optics Polycarbonate, Sheds Rain, and is Highly Scratch Resistant due to our patented coatings.
Starting June 8th we will be taking Pre-Orders for shipment approx. the end of June.

Thanks for your input
Don Frank
F4 Customs
330-968-4644

Honest opinion and you know what they say about opinions.....too big for me. I'll stick with the BR and at 6'2", I'm very happy with it's look and performance...with a full size helmet and a half helmet w/small shield. Good luck though, it sounds like there are plenty of folks willing to purchase your product.

 

[Chupaca]

Very nice..!!

looks like a winner. Lots of folks are knocking at your door ....:roflblack: great job...:thumbup:

 

[ABQSpyder]

Surprised no one commented about the Air Wings ?

Shocks on a windshield?

 

[stebrock]

Have the Blue Ridge installed now. The extra height on yours is great however the shape makes it look large and bulky. Obviously aftermarket. What are the extra holes for in the lower center attachment point? Is there going to be a cover plate fot the screws? Also this appears to eliminate the ability to mount speakers on the "rails" as Lamont did.
Rick

 

[ABQSpyder]

Have the Blue Ridge installed now. The extra height is great however the shape makes it look large and bulky. Obviously aftermarket. What are the extra holes for in the lower center attachment point? Is there going to be a cover plate fot the screws? Also this appears to eliminate the ability to mount speakers on the "rails" as Lamont did.
Rick

It's probably a prototype not finished product.
Guess you have to make choices Windshield or speakers.

 

[thugsmasher]

Price????

 

[F4 Customs]

F4

Are these photos of the taller shield?

These are just pictures of the prototype. We will make one shorter and one taller

 

[F4 Customs]

F4

Have the Blue Ridge installed now. The extra height on yours is great however the shape makes it look large and bulky. Obviously aftermarket. What are the extra holes for in the lower center attachment point? Is there going to be a cover plate fot the screws? Also this appears to eliminate the ability to mount speakers on the "rails" as Lamont did.
Rick

I understand that it looks big but the performance is great The extra holes in the lower will not be there This is a prototype There will be cover plates for the front also

 

[F4 Customs]

F4

Are these photos of the taller shield?

Not yet

 

[jcthorne]

Just a question but why add a new bracket for the arms to connect to rather than using the windsheild mount bolt BRP provided at either end of the instrument cluster?

Also be aware that that rail your bracket is screwed to is plastic, not metal on the F3 base model and will not support a heavy load.

 

[dreid999]

F4 Custom Windshield for F3



Looks good, can't wait to get mine.:yes::yes:

Folks, Here is an update for those folks that are waiting for the F4 Windshield for the F3. We have had some great results and the windshield is complete and the hardware is just about completed. The testing will be completed this week. The air flow is awesome.

The windshield will be manufactured in two different heights. We also will over clear or tint. One height you will be able to look over and the other you will look through.
The hardware is made in such a way you will have adjustability of these two windshields so you can tweak it just right.

I have attached some photo's for your preview and would like to have your opinions sent to donfrank@f4customs.com.

The shield is made from our High Optics Polycarbonate, Sheds Rain, and is Highly Scratch Resistant due to our patented coatings.
Starting June 8th we will be taking Pre-Orders for shipment approx. the end of June.

Thanks for your input
Don Frank
F4 Customs
330-968-4644

 

[F4 Customs]

f3 shield

WE can not use the existing brackets as the mounting points are to low for our shield and any attempt to make a adaptor did not work.
I will look into the mounting a little closer but we are still in prototype.
Don

Just a question but why add a new bracket for the arms to connect to rather than using the windsheild mount bolt BRP provided at either end of the instrument cluster?

Also be aware that that rail your bracket is screwed to is plastic, not metal on the F3 base model and will not support a heavy load.

 

[BeRight]

WE can not use the existing brackets as the mounting points are to low for our shield and any attempt to make a adaptor did not work.
I will look into the mounting a little closer but we are still in prototype.
Don

Different strokes for different folks - please get rid of the BRP breakaway/smakeaway mounting bracket

 

[Nyparrothead]

As an ex goldwing rider I have to say F4 shields are the most durable out there. Most aftermarket and some OEM stuff will scratch if you get to close to it with a rag made of just about anything. Made the mistake one time on a cross country trip on the wing and cleaning the OEM shield to get rid of some of the bug guts. The shield was ruined.....



The F4 is the real deal IMHO and I can't wait for it to come out. Now don't get me wrong, Madstad does great work, in fact if given the opportunity I would use the F4 shield with the Madstad adjustable bracket. The best of both worlds

mark

 

[dreid999]

Pre-order

QUOTE=F4 Customs;985533]Folks, Here is an update for those folks that are waiting for the F4 Windshield for the F3. We have had some great results and the windshield is complete and the hardware is just about completed. The testing will be completed this week. The air flow is awesome.
Just ordered mine, can't wait...:yes:


The windshield will be manufactured in two different heights. We also will over clear or tint. One height you will be able to look over and the other you will look through.
The hardware is made in such a way you will have adjustability of these two windshields so you can tweak it just right.

I have attached some photo's for your preview and would like to have your opinions sent to donfrank@f4customs.com.

The shield is made from our High Optics Polycarbonate, Sheds Rain, and is Highly Scratch Resistant due to our patented coatings.
Starting June 8th we will be taking Pre-Orders for shipment approx. the end of June.

Thanks for your input
Don Frank
F4 Customs
330-968-4644[ QUOTE]

 

[pslawing]

Any more news on this windshield ?

Any more news of the F3 custom windshield from F4 Customs?
thanks!