F3 windshield discontinued

[GunDoctor]

I decided to add the Route 66 windshield to my build. Dealer called me back to let me know that the Route 66 is discontinued!! Really, it isn't even out yet. So had to go to the next smaller size, which will not be available until March.


Sent from my iPad using Tapatalk

 

[MikeP]

I decided to add the Route 66 windshield to my build. Dealer called me back to let me know that the Route 66 is discontinued!! Really, it isn't even out yet. So had to go to the next smaller size, which will not be available until March.


Sent from my iPad using Tapatalk

What's the name of that one??? Thx

 

[stevedfive]

Blue Ridge Windshield
#219400503

 

[MikeP]

Blue Ridge Windshield
#219400503

That's the one I ordered..

 

[den1953]

Wait & See

That's what I'll have to do, just wait & see. I was thinking the Route 66 windshield as it looks I'm tall enough to see over the top, judging from that windshield video. The Blue Ridge is definitely lower cut and my only concern might be windblast/buffeting as well as eating a few bugs.

 

[PrairieSpyder]

I'd check around with other dealers for the windshield. Maybe that part is delayed and the dealer just wants to complete the sale as soon as possible.

 

[flamingobabe]

is the Route 66 the same shield that was on the ST...if so....maybe BRP discontinued it because of the dip in the shield that caused distortion while riding through twisties.......I look over the shield....but in the middle of twisty roads just the angle of the spyder and yourself there was distortion and you had to compensate....very distracting....purchased a Cal-Sci

 

[Bob Denman]

:agree: When it comes to any dealer... :shocked:
It's okay to trust what they're telling you; if you can independently verify it! nojoke

 

[Dan McNally]

:agree: When it comes to any dealer... :shocked:
It's okay to trust what they're telling you; if you can independently verify it! nojoke

Actually, if it is really a good dealer, you can take what they tell you to the bank. Any dealer that blows smoke up your :cus: is, by definition, not a good dealer. nojoke

 

[Highwayman2013]

With a little patience the aftermarket should come up with something. I liked riding the F3 but it needs a windshield for me to enjoy it.

 

[SpyderAnn01]

is the Route 66 the same shield that was on the ST...if so....maybe BRP discontinued it because of the dip in the shield that caused distortion while riding through twisties.......I look over the shield....but in the middle of twisty roads just the angle of the spyder and yourself there was distortion and you had to compensate....very distracting....purchased a Cal-Sci

I think you are right. If I remember correctly the windshield on the touring F3 demo bike at the motorcycle show had the dip in it.

 

[SpyderRx]

That's the windshield I would get too. Hard to believe it is discontinued already.

 

[GunDoctor]

Well, dealer gave me a nice discount, so I won't miss the one or two inch difference. The only delay is it won't be available until March. F3 is still on schedule for Jan.


Sent from my iPad using Tapatalk

 

[Bob Denman]

Actually, if it is really a good dealer, you can take what they tell you to the bank. Any dealer that blows smoke up your :cus: is, by definition, not a good dealer. nojoke

:agree: But you've got to determine what kind of dealer they are, first... :thumbup:

 

[ARtraveler]

Interesting that something would be discontinued before it is even on the market.

Trust but verify is also my advice. Give our friend Pitbull a call, see what they have to say.

This could be like the elusive electronic frunk switch. Yes, no, yes, no, etc.

BRPcare final word on that--no switch--they are working on getting it out of the vehicle information system.

 

[Slagiatt]

Stay tuned...

Since I've already paid for the Route 66, I called my dealer (probably the most reputable dealer in Indiana) and their Parts manager is going straight to the source...I'll post his reply when I hear back.

Looking at the BRP windshield video, it looks like the Blue Ridge has the same width as the Route 66 but is just that 2-3" shorter. I could live with that...

 

[PrairieSpyder]

If it's really discontinued, it must be they decided just not to offer it after all. After publishing all those catalogs, brochures and web-pages. What a marketing screw-up!

Which makes me think the dealer isn't being straight or is, at best, mistaken.

 

[OJ UK]

The Route 66 windshield was made originally for the ST and I fancy that is
the one that has been stopped. As the F3 is totally different it would not be
interchangeable. The best way to find out is to download the F3 parts list and
make a check using the part number.

 

[BikerDoc]

:agree: When it comes to any dealer... :shocked:
It's okay to trust what they're telling you; if you can independently verify it! nojoke

I have a copy of the BRP memo from their parts dept to the dealers which announced the change plus confirmation from BRP District Rep

 

[BikerDoc]

Since I've already paid for the Route 66, I called my dealer (probably the most reputable dealer in Indiana) and their Parts manager is going straight to the source...I'll post his reply when I hear back.

Looking at the BRP windshield video, it looks like the Blue Ridge has the same width as the Route 66 but is just that 2-3" shorter. I could live with that...

According to the official spec provided in the BRP memo the Blue Ridge is a full 5 inches shorter than the route 66