F3 Top Case

[E Reed]

Just added the top case added to my 2016 F3 Ltd however, the nanny flashes an open rear case warning off and on. Any suggestions to a possible resolution would be greatly appreciated.

Eddirt

 

[Tango]

Just added the top case added to my 2016 F3 Ltd however, the nanny flashes an open rear case warning off and on. Any suggestions to a possible resolution would be greatly appreciated.

Eddirt

It's the latch on the case. Mine did the same thing. It's not making enough contact to push the sensor down. We added a piece of thick foam tape to the part that sticks down to contact the switch. Works great. :thumbup: Tom :spyder:

 

[Chupaca]

Let's see....

It's all in the switch...:agree: don't know the type of switch and if it has any adjustments or tabs that can be bent a bit for better contact . :dontknow:

 

[armyspydervet]

Mine did the same thing. The latch is only being held in place with clips. Put a screw in it and it work flawlessly. But definitely a design flaw.

 

[T.P.]

Top case micro switch

The micro switch for the top case is only held in place with two plastic fingers on the sides and a plastic stop on the bottom.
There is a hole in the micro switch for a screw or maybe a plastic push pin to hold the switch in a non moving position. It looks like no one got that screw or pin.

T.P.

 

[E Reed]

Thanks to all for the replies about the top case warning issue, did the foam trick for now and it worked planning to look at the latch mods later.

Eddirt

 

[Slowpoke387]

Another latch issue lol. Seems like anything that opens or closes on these never seems to be quite right :banghead:
I remember the demo in our local dealer. Neither rear bag on the T would even close. Adjustments go a long way.

 

[ARtraveler]

opcorn:opcorn:opcorn: