The only thing I don't like about my F3-S is how the rear seat only fastens on in one place. For such an expensive bike, this is ridiculous. I'm sure others agree. I would like to fit the Mono Seat Cowl as I usually ride solo. However I am concerned about the fit. Is it really loose? Can anyone enlighten me?
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
F3 mono seat cowl
- Thread starter XB12X
- Start date
OK-DZ9R
Member
OK-DZ9R
Member
It is compatible with the backrest. Although I don't use one, you can see here where a slot is provided to install it.
Sarge707
Active member
I have a yellow one and it looks Nice BUT that storage KEY is such a pain in the as* I rarely open it!!
OK-DZ9R
Member
Yeah, the lock is total cheese. About the third time I used mine, the little keyhole guard whose main function seems to be to keep you from inserting the key, stuck crosswise across the keyhole. The lock is a standard piece. I think I can replace it with one that works. I'll report back if I do.
Thunderpunk
New member
I just received my 2021 FS-3 Special Series that comes with the seat cowl. I also have the rider's backrest. I'm not seeing how to install the backrest with the anti-theft bolt in place. The bolt will not fit through the slit in the rear cowl. The instructions are useless in this regard. Any one have any pointers?
UPDATE: I decided to cut a slit in the rubber on the cowl that allows me to bend the rubber around the backrest post and then drop it back into place. Works fine, but would have preferred not to have to cut a brand new part like that.
UPDATE: I decided to cut a slit in the rubber on the cowl that allows me to bend the rubber around the backrest post and then drop it back into place. Works fine, but would have preferred not to have to cut a brand new part like that.
CloverHillCrawler
Active member
2020 F3 cowl is secure but loose , the rattle from it is incessant.
I haven't been to impressed with my build quality of the body panels in general . After going out for my first long ride on the highway I can hear the cowl rattling in back of me, Both panels above the headlights rattle as well as the black bezels around the display.
And after taking a few good bumps on 95 one of the screws on the right knee panel popped off the frame, upon examination the torx head was overtightened and is stripped.
I am having a lot fun on it and enjoy the ride but I sure hope all of this rattling can be resolved.
I haven't been to impressed with my build quality of the body panels in general . After going out for my first long ride on the highway I can hear the cowl rattling in back of me, Both panels above the headlights rattle as well as the black bezels around the display.
And after taking a few good bumps on 95 one of the screws on the right knee panel popped off the frame, upon examination the torx head was overtightened and is stripped.
I am having a lot fun on it and enjoy the ride but I sure hope all of this rattling can be resolved.
Similar threads
