I took the top (rear) case off my 2018 F3 Limited. Love it - but now I have no radio antenna. I would love to put an after market antenna on there, but the antenna wire connection under the seat on the 2018 F3L is a shape I have never seen before. Are there any adapters out there that will allow for a standard auto antenna cable to plug into the F3 antenna receptacle?
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
F3 Limited Antenna wire plug - any adapters to suit?
- Thread starter BlueF3Ltd
- Start date
With 37 people looking at this post, and no comments, I can only assume there is no easy solution. So I ordered a new antenna cable assembly, antenna support, and antenna for a 2018 F3 Ltd. I did not want to disassemble the wiring and antenna from upper cargo box for fear I would forget how it goes back together, or I would break something. When the parts arrive, I will try to figure out where to mount the antenna. Possibly on the rear cargo carrier that I mounted behind the rear seat. I will update the post if I find a good solution that both works good and looks good.
pieman9155
Member
yes the antenna does go on the left side
Rattlebars
New member
F3T antenna set up. I use it as a flag pole and a pole dancer enhances it. I cannot find the parts needed in the fiche though.
Not hearing anything, I just bought a new antenna, cable and mount. I did not want to mount the antenna to anything that would still be there when I put the top rear case back on, so I mounted it to the side of the rear cover. See picture. Tested it. All works fantastic. Just wanted to let you know it works.
BLUEKNIGHT911
Sadly Passed Oct 2024 - RIP
Glad this worked out for you :clap: I didn't comment earlier because I wasn't sure what I did would help. Years ago I broke the OEM antennae on 14 RT .... the reception wasn't good, so I tried a Bosche manual Auto antennae. This had the standard type plug / jack and it fit into my OEM radio in place of the OEM antennae...... right now my reception is three times better than it was .... Mike :thumbup:
Yebogogo64
New member
I added a rack to my F3, and got a stubby antenna with it. Total garbage. Do you have a pic of the bosch antenna?
Yebogogo64
New member
Just following up, if there are any suggestions for replacement of the stubby antenna which came with F3 aftermarket rack (which was needed for my givi box). I have the 2016 f3 ltd
I realize this is an old post and I would have been able to answer the OP's question IF it had been a current post. I should receive my 'adapter' tomorrow from Amazingzon; the funny looking connector is a Fakra Z connector....no, seriously, that is what they are called. I guess they are becoming the way to connect antennas on many new autos. I ordered two, a male and a female to insert an FM active booster in hopes of pulling in more stations. We'll see, hopefully by tomorrow!
ChicagoSpyder
New member
Looking forward to your results, the FM reception on my scooter absolutely sucks.
so you had to buy the piece ,that covers the spot where the topcase mounts, do you have part numbers for what you had to get to do that, i also want to take mine off, and get the cover that fits , mine is a 2020 f3L
Similar threads
