F3 Engine Check Light with display "Check DPS"

[Dennis in Lodi]

retrieving active codes yourself

it takes two hands to retrieve codes. With the key on and the display normal, take your left thumb and depress the eco and the set button at the same time. While those two buttons are down take your right thumb and press the turn signal button straight in. So for just a moment you are pressing three buttons in at the same time. All three buttons are on the left handle bar controls.
If the screen is blank there are no active codes. If you see letters and numbers like P0172 that is an example of codes.
The next time you see any idiot lights, pull over and get the codes.



Dennis

 

[Black Pig]

it takes two hands to retrieve codes. With the key on and the display normal, take your left thumb and depress the eco and the set button at the same time. While those two buttons are down take your right thumb and press the turn signal button straight in. So for just a moment you are pressing three buttons in at the same time. All three buttons are on the left handle bar controls.
If the screen is blank there are no active codes. If you see letters and numbers like P0172 that is an example of codes.
The next time you see any idiot lights, pull over and get the codes.

Dennis

^^^ Hero post... :bowdown::bowdown::bowdown::bowdown:

 

[Steamer]

Do you keep the engine running before pulling the code?

 

[Dennis in Lodi]

Do you keep the engine running before pulling the code?

I can do this function while driving. Sometimes there are codes that drop off when the key goes off then on. Some temporary codes are related to manifold pressure being exceeded after red lining the bike. Or some temporary fuel codes from being rich or lean.

If you think you might lose the code, keep the bike running.

 

[Inflatableman]

Speedster; Any update? Having the same issues and the dealer is calling for replacing DPS.

 

[Black Pig]

Speedster; Any update? Having the same issues and the dealer is calling for replacing DPS.

If it's under warranty, I would just get it replaced, if not, wait until total failure and keep an eye out for one on the bay.

Can't believe how crap the f3 is. Shame on BRP .

 

[bluewoo]

This is what mine does sometimes after start up, and its brand new.:sour:

https://photos.app.goo.gl/MY49ks4wEPZRVTPX9

2018 RT Limited

 

[JayBros]

Your picture shows the ignition switch is in the Off position yet you say it's right after start up. What am I missing?

 

[stmike 1800]

Your picture shows the ignition switch is in the Off position yet you say it's right after start up. What am I missing?

It is a video

 

[Speedsterjohnny]

The dealer did replace the DPS unit under warranty. The service manager said that there were a couple of iterations of the unit and the 2017 and early 2018 models seemed to be having this problem. When I was picking up the trike, I was told another one had come in with the same problem. Much to my pleasure, the problem has been resolved. BTW, this is a great, fun machine. I am really enjoying it.