Experienced Spyder Rider Needed

[bikerdad]

I am looking for someone that has been riding the Can Am Spyder for some time to ride my reverse trike conversion. This is to evaluate my conversion and compare it to the Spyder. I have only about 10 minutes riding time on the Spyder and that just does not give me enough riding time to do the evaluation.

I am looking for someone in the Lincolnton, NC or surounding area that has the time to do this.
If anyone is interested, you can email me at [email protected]

Hope everyone had a great Thanksgiving day!

 

[scooterexpress]

Nice conversion what kind of cash did it cost todo that? I betalot of goldwingers might like it but I still love my spyder.

 

[SNOOPY]

That looks good :thumbup:



Does it run hot? :roflblack:


J/K

 

[Chupaca]

Nicely done..!!

very good looking wing...would love to try it out for you but too far away. How does it compare in size to a roadster..?? Would like to hear your results when they're in...:thumbup:

 

[Wiredux]

Your 6 hours away from me or I would.

 

[ulflyer]

OMG, I love the look of it

You should get plenty of replys from those in the Charlotte area. If it wasn't so cold I'd love to test ride it with you and you could ride my RT. If you don't get a response let me know and maybe the wx will ease up soon.

 

[BLUEKNIGHT911]

SUPER INTERESTING

I am looking for someone that has been riding the Can Am Spyder for some time to ride my reverse trike conversion. This is to evaluate my conversion and compare it to the Spyder. I have only about 10 minutes riding time on the Spyder and that just does not give me enough riding time to do the evaluation.

I am looking for someone in the Lincolnton, NC or surounding area that has the time to do this.
If anyone is interested, you can email me at [email protected]

Hope everyone had a great Thanksgiving day!

View attachment 80116

Quite a few years back ( 8+ ) Hannigan Motorsports in Kentucky did something like this and a Quad also ( Pics have been posted here on Spyderlovers ) . Does yours have anything to do Hannigan ? ? ?.....................Mike :thumbup:....................................PS i think it looks Great :yes: :yes: :yes:

 

[bikerdad]

Thanks all for the replies. To answer some of the questions about the trike. I think the Spyder is a really cool ride. I love the reverse trike concept but I just wanted a larger engine so I used the Goldwing for my platform. I made the the conversion based off the Spyder. I have seen the Hannigan trike and I am not involved in that company in any way. This is something I did on my own. I have put over 3000 miles on the trike since I finished it. Everything seems to work fine. No heating issues at all. I have never owned a trike before so it did have a different feel than the two wheel bike. I just want someone that has had time on the Spyder to ride my trike to make sure it feels normal. I did a test ride on a Spyder but it was low speed in front of the dealer on a small dead end street for about 10 minutes. Not really enough time to get a feel for it.

uiflyer..... If I can not find someone local, I may get back to you. Maybe find a warmer day ride it to your location. Thanks again everyone!

 

[rick_w]

I am looking for someone that has been riding the Can Am Spyder for some time to ride my reverse trike conversion. This is to evaluate my conversion and compare it to the Spyder. I have only about 10 minutes riding time on the Spyder and that just does not give me enough riding time to do the evaluation.

I am looking for someone in the Lincolnton, NC or surounding area that has the time to do this.
If anyone is interested, you can email me at [email protected]

Hope everyone had a great Thanksgiving day!

View attachment 80116

Great Job. Now that is cool.

 

[SpyderAnn01]

That is really nice looking. I'm a little far away or I'd be happy to test drive your machine.

 

[ulflyer]

Thanks all for the replies. To answer some of the questions about the trike. I think the Spyder is a really cool ride. I love the reverse trike concept but I just wanted a larger engine so I used the Goldwing for my platform. I made the the conversion based off the Spyder. I have seen the Hannigan trike and I am not involved in that company in any way. This is something I did on my own. I have put over 3000 miles on the trike since I finished it. Everything seems to work fine. No heating issues at all. I have never owned a trike before so it did have a different feel than the two wheel bike. I just want someone that has had time on the Spyder to ride my trike to make sure it feels normal. I did a test ride on a Spyder but it was low speed in front of the dealer on a small dead end street for about 10 minutes. Not really enough time to get a feel for it.

uiflyer..... If I can not find someone local, I may get back to you. Maybe find a warmer day ride it to your location. Thanks again everyone!

Sounds good. we could meet midway; maybe China Grove area where theres some good open roads or some place near Mooresville ...open roads in that area also. If you are up to it, I know Salisbury area very well and some roads with a good mix of open/hills/curves, if that wouldn't be too far for you to come. I'm retired so any day will work if I can be of help.

 

[Bob Denman]

That is a VERY exciting design! :clap:
Good Luck with this project; please let us know what happens when you find a test pilot... :2thumbs:

 

[BLUEKNIGHT911]

THIS TRIKE

Personally I thought the Hannigan Trike left a lot to be desired in the looks dept. in the front.....same goes for the one that is currantly being marketed in Europe using both the Goldwing and Harley frames and engines ...............Yours on the other hand I think is a work of Art.......I really wish I were closer......Buuuuuuuuuuuuuuut I am going to Fla ( on 12-3 ) to pick up a car I bought and drive it north to Vermont, so I could easily stop by test it if you like..By way of experience I have two Spyders...and 5 yrs riding time ....I have also built two Cobra's ( from Factory Five ) .......PM me if you think this would work for you........Mike :thumbup:...:2excited:

 

[Bob Denman]

(Mike, I hope that you ccan make this happen! :thumbup

 

[SpyderAnn01]

Personally I thought the Hannigan Trike left a lot to be desired in the looks dept. in the front.....same goes for the one that is currantly being marketed in Europe using both the Goldwing and Harley frames and engines ...............Yours on the other hand I think is a work of Art.......I really wish I were closer......Buuuuuuuuuuuuuuut I am going to Fla ( on 12-3 ) to pick up a car I bought and drive it north to Vermont, so I could easily stop by test it if you like..By way of experience I have two Spyders...and 5 yrs riding time ....I have also built two Cobra's ( from Factory Five ) .......PM me if you think this would work for you........Mike :thumbup:...:2excited:

I think that the European Honda reverse trike has the same kind of look as the Spyder but you are right about this one here it is really nice looking. I had inquired about the European one a few months ago and they weren't marketing them in the US but I got an email this week from a guy in Northport, FL who is going to do the conversions for $15,000.

 

[BLUEKNIGHT911]

MAYBE

(Mike, I hope that you ccan make this happen! :thumbup

Bob have you ever seen a 1934 Mercedes Benz 500K sports roadster ?

 

[Bob Denman]

:yikes: On Barrett-Jackson; a bunch of years' back... :bowdown:

 

[BLUEKNIGHT911]

500 K

:yikes: On Barrett-Jackson; a bunch of years' back... :bowdown:

:roflblack: Bob, B-J is out of my league. However this one is a very close re-production........Mike :thumbup:

 

[Bob Denman]

They are a GORGEOUS vehicle!! :2thumbs:

 

[bscrive]

I am looking for someone that has been riding the Can Am Spyder for some time to ride my reverse trike conversion. This is to evaluate my conversion and compare it to the Spyder. I have only about 10 minutes riding time on the Spyder and that just does not give me enough riding time to do the evaluation.

I am looking for someone in the Lincolnton, NC or surounding area that has the time to do this.
If anyone is interested, you can email me at [email protected]

Hope everyone had a great Thanksgiving day!

View attachment 80116

That is one awesome looking wing. I love how you did the front end shaping. The looks are 10x better than the European design. Honda would do well to buy your design and sell them. The only thing that would probably kill them is the cost to produce it though. Well done. :thumbup::thumbup: