..EMERGENCY .. for 2022 RYKER owners - recall on Handle-bar bolts!

[BLUEKNIGHT911]

I just heard this on the news ....NHSTA ... just said certain 2022 Rykers are now on DO NOT RIDE Recall for a possible HANDLE-BAR BOLT issue ..... Call your dealer immediately to verify ..... good luck .... Mike :thumbup:

 

[YIRYDE]

Here is the link, https://www.nhtsa.gov/press-releases/do-not-ride-recall-can-am-ryker-motorcycles#:~:text=Bombardier%20Recreational%20Products%20is%20warning,the%20risk%20of%20a%20crash.

 

[YIRYDE]

Here is the link, https://www.nhtsa.gov/press-releases/do-not-ride-recall-can-am-ryker-motorcycles#:~:text=Bombardier%20Recreational%20Products%20is%20warning,the%20risk%20of%20a%20crash.

Here is the link from BRP, https://can-am.brp.com/on-road/us/en/owner-zone/safety-recalls/handlebar-stem-bolt-may-break-potential-loss-of-steering-control.html

 

[EchoVictor]

Thanks for the heads-up guys. Just talked to my dealer and need to get mine over there ASAP. They have 10 replacement bolts, and four are already spoken for.

Said no appointments, just first-come-first serve....

Later,
EV

 

[Beanz1]

I had that problem with my 2021 Ryker Rally.

 

[BLUEKNIGHT911]

Here is the link, https://www.nhtsa.gov/press-releases/do-not-ride-recall-can-am-ryker-motorcycles#:~:text=Bombardier%20Recreational%20Products%20is%20warning,the%20risk%20of%20a%20crash.

Thanks for the research and posting that LINK .....:thumbup::thumbup::thumbup:...... Mike hyea:

 

[Markubis]

There's a recall on the locking front latch as well. Seems it doesn't always unlock.

 

[LongIsland]

2022 Ryker owners - STOP Riding

Just read this in today's (7/21/2022) Long Island Newsday.

 

[newdave]

Holy ****, Batman! Gotta wonder how something like THAT sneaks through.

 

[BajaRon]

I love my Spyders and Rykers. They are fine machines. But it continues to amaze me that, from the beginning, BRP has cut corners in critical, usually very inexpensive but critical areas, that blacken the eye of the finished product and damage the image of what, otherwise, could be a much more appealing machine. From the original oil filters which were so poorly and cheaply constructed that they were destroying engines which had to be replaced on warranty, spark plug wires which deteriorated quickly, through to this current situation. It is truly sad.

 

[tbambrick]

Do not ride your 2 month old Ryker.
You must have it towed.
No, BRP will not reimburse you for the tow bill.

Quite a company.

Tim Bambrick
Monkton, Maryland

 

[ziggy]

I love my Spyders and Rykers. They are fine machines. But it continues to amaze me that, from the beginning, BRP has cut corners in critical, usually very inexpensive areas, that blacken the eye of the finished product and damage the image of what, otherwise, could be a much more appealing machine. From the original oil filters which were so poorly and cheaply constructed that they were destroying engines which had to be replaced on warranty, spark plug wires which deteriorated quickly through to this current situation, it is truly sad.

:agree:

 

[gkamer]

This issue has been a big topic on Facebook Ryker groups. I feel so bad for those folks who waited and waited for their Rykers only now being not able to enjoy them. Unbelievable.

 

[EchoVictor]

Do not ride your 2 month old Ryker.
You must have it towed.
No, BRP will not reimburse you for the tow bill.

Quite a company.

Looking through the recall details, it looks like an infant mortality problem (if it's going to fail, it's going to fail quickly). Main force that would shear a bolt like that is a really heavy steering input. Since there's no reimbursement for towing, I decided to just be gentle and ride it in this morning. No issues, and it's in the queue for getting fixed. Dealer said it would be about a week to get to it....

Later,
EV

 

[oldguyinTX]

Another in a long series of dumb practices by BRP. One would think that they would build the best machines possible for their customers. I mean, if an RT only cost $16K rather than $26K and north of that, one might expect issues. But for what we pay for these machines, cheaping out just borders on criminal. Rather than learning from being bitten on the a** by a series of expensive recalls, they just keep churning out machines that are somewhat substandard and/or dangerous. I can only imagine what a wrongful death lawsuit would cost them. Remember the exploding Ford Pinto? Ford was doing then exactly what BRP is doing now. Make money and to h*** with the buyer.

 

[pukaryder2873]

Wow thanks so much for this, i just had my dealer pick mine up, it literally stopped working after 2 hours of owner ship, the day i bought it, and now they had to pick it up again and I haven't even made my first payment, and now this.....wow, i love riding it, but this seems to be a little crazy

 

[BajaRon]

Another in a long series of dumb practices by BRP. One would think that they would build the best machines possible for their customers. I mean, if an RT only cost $16K rather than $26K and north of that, one might expect issues. But for what we pay for these machines, cheaping out just borders on criminal. Rather than learning from being bitten on the a** by a series of expensive recalls, they just keep churning out machines that are somewhat substandard and/or dangerous. I can only imagine what a wrongful death lawsuit would cost them. Remember the exploding Ford Pinto? Ford was doing then exactly what BRP is doing now. Make money and to h*** with the buyer.

To be fair. The 'Exploding' Pinto was a focused hit piece. Many cars of that era had similar, rear mounted fuel tanks, resulting in some fiery crash scenarios. While not necessarily as safe as it might have been, it was not worse than others in the field. And Ford did extensive testing to get the design certified by DOT.

The people who did the exploding Pinto video destroyed several Pintos with ever increasing speeds and destruction in attempt to create the desired explosion. But without success. Frustrated, they mounted a remotely triggered ignition device and proceeded with a final run at a speed and force which collapsed the rear of the Pinto all the way into the back seat. Fuel spewed everywhere, but still no explosion as the larger car pushed the Pinto along. At which point they triggered the ignition device they had rigged. This is why the resulting explosion was so delayed in the video. The previous videos where no fire resulted were not shown or mentioned. Making it appear as if their first attempt was successful. In other words. It was agenda, not scientific test, driven.

None of this was revealed until after the law suit against Ford was settled.

Not exactly a fair and equitable way to determine fault.

 

[GeorgeXP700]

If it was mine I’d remove the bolt and replace with an equivalent preferably better grade fastener and ride until the dealer has a replacement.

 

[canamryder]

I'm not going to blame BRP 100% on this one, here's why and only theories. An outside vendor most likely supplies these bolts to BRP. Then vendor runs out of correct matl. bar stock and substitutes different stock....naughty. Maybe correct matl. but heat treated through (brittle) instead of case hardened (think egg). Maybe the bolts were machined with no or undersized inside radius at under the bolt head or at the end of the threads. Inside sharp corners cause what pro machinist call "stress risers". Maybe all of the above. I wonder if the bolts are all breaking in the same spot. Maybe certain people up there need a touch more education and responsibility. Bolts may not need a Certification of made to spec. Certs. are only pieces of paper anyway (like dollars) and heck...they're not airplane parts!

 

[canamryder]

If it was mine I’d remove the bolt and replace with an equivalent preferably better grade fastener and ride until the dealer has a replacement.

Any bolts at supply vendors will have to be recalled also. So maybe ACE is the place!