Easy mount for new 2014 RT for aftermarket horn like Stebel or Wolo Big Boy etc

[stevedfive]

I just ran the wires according to the instructions that came with the horn.

 

[YIRYDE]

Horn wiring Polarity

I'm installing my Stiebel horn and need some help determining which wires are positive and negative. The wires that connect to the factory horn are Light Blue/Orange stripe and Green/White stripe.

Can someone let me know which of these wires they connected to the positive and negative terminals on their horn?

Thanks in advance

 

[saint999]

I wanted to pass along an easy way to mount a new aftermarket horn to your 2014 Spyder RT. They now have room on the left side to make it easy to replace.

These horns are sold at most automotive stores or online for as low as $29. Some of the higher end ones they recommend getting the harness kit which will wire directly to your battery which are $25-35. I chose to try mine with the stock wiring for now as I didn't feed like running the wire harness at the moment.

View attachment 84170

This picture will show the cut out on the top left designed to work well with this bolt setup I am about to show.

This setup consists of one M8-1.25 x 30 bolt, two M8-1.25 Nuts and two 5/16" Lock Washers with External tooth. (This stuff is less than $5.00 from Lowes)

View attachment 84171

Here it is mounted to the existing horn located on the left side.

View attachment 84173

Here is the horn mounted to the spyder with this bolt/nut setup.

View attachment 84172

Very easy and quick! Enjoy!

Im probably an idiot for not knowing how to know this. But what Tupperware has to be removed to get to the horn on the 2014 RT?

 

[Tango]

Im probably an idiot for not knowing how to know this. But what Tupperware has to be removed to get to the horn on the 2014 RT?

Left side panel. The one above the plastic wing. if you look through the black mesh you can see the horn. :thumbup: Tom :trike: