• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Easy LED trunk light mod for the RT

Lamonster

SpyderLovers Founder
I was getting ready to add another LED light for my licence plate and when I unpacked the LED I saw where it had a switch and a nice little battery pack prewired to the lights. I decided to use the prewired LED as a trunk light. It was a real easy install and all I had to do is drill a couple of holes for the switch and to run the wires. It does a nice job of lighting the inside of the trunk and it's a very clean install. The lights are pretty cheap and you can find them at any auto parts store.
:doorag:
attachment.php
 
Battery operated

I installed an LED light. It takes no installation. I am still on the first set of AA batteries, and you simply press it for light. If I need a small portable light I remove it from the Velcro and put it back when done


I guess I used the K.I.S.S. system for this project.
 
I installed an LED light. It takes no installation. I am still on the first set of AA batteries, and you simply press it for light. If I need a small portable light I remove it from the Velcro and put it back when done


I guess I used the K.I.S.S. system for this project.
I had one of those too but I guess I left it on and ran the batteries down. This one has a spring loaded switch so that won't happen. Whatever works for you, this is just one other option. :doorag:
 
Me Too

Picked up mine at Auto Zone ($15.95) last night, and will install after work today. Great idea for a simple solution.

J. D.
 
Manufactured by ALPENA 8"/20cm FLEX LED White/Blanc/Blanco
registered trademark of the Marklyn Group, Inc. Brampton, Ontario Canada L7A 1A2
Autozone
SKU # 105-0611
IPC = 0 84902 77443 6

KYSPYDER
 
Got it done

Just finished the install on the LED rear trunk lights. I installed both the LED's one on each side. I also removed the rear seat backrest, it made it easier for me to drill the holes.

J. D.
 
Back
Top