-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Cutting out....
- Thread starter kbarnet5
- Start date
I noticed that when the engine is not fully warmed up, I get a stall from the injection system....which should never, ever happen. I have had the bike serviced a couple of times and the service dept. cannot re-create the problem (no problem, no fix). SO, it is important to get it documented for future work or if a recall comes by. Watch to see if it happens more often than not, during the early part of your ride.
bjt
Very Helpful Member
Does your problem happen all the time or only when the engine is cold? A few of these replies refer to the cold running behavior of the engine. Mine runs rough for the first few minutes when I just fire it up and take off also. If it happens all the time, when 1 or more bars are showing on the temp gauge, then there is another problem.
Similar threads
