Customdynamics

[Dgjason]

Has anyone installed the Customdynamics "Spyder Cool Magic Billet Bullets" lights ?

 

[Dgjason]

Hello.....anyone home ???? :shocked: LOL. Is that a no ?

 

[pickelhead]

Why don't you be the first? opcorn:

 

[Dgjason]

Ok, I'll be the first. :2thumbs:

Dennis

 

[Flamewinger]

Yes I have. They light up pretty well but I use them so I'm seen better by others.

I drilled holes on the A arms that extend out to the wheels and used a spacer underneath the light housing so that it wouldn't bottom out at the lower part so the wires wouldn't rub. I bought an extra rocker switch that comes with the fog lights to use next to the fog light switch and use the same wiring to power the switch although it just just makes the switch light up. I use wires from the cool magic lights to actually power the lights from an accessory fuse box. I also had to extend a part of the harness so the plugs would be connected inside and behind the coolant tank. Out of the way rather than have them plugged in right underneath the A arm to the wheel which would be a big unsightly bulge.

I found that the one blank switch spot has a plug underneath because the harnesses the same as on the RT's, but is not used so I got a switch from an RT parts list and used it with this unused plug. Kept the wires to provide power to the switch but used a couple of other wires to connect to the cool magic harness. The pictures below show the full set of plugs underneath and it's the orange one that you're going to use. Look at the white fog light plug and use the same grn/gry wires. So use the pink/yel wires.




Susie
Sent from my iPad using Tapatalk

 

[Phil]

Way to go Susie!!

 

[Dgjason]

Yes I have. They light up pretty well but I use them so I'm seen better by others.

I drilled holes on the A arms that extend out to the wheels and used a spacer underneath the light housing so that it wouldn't bottom out at the lower part so the wires wouldn't rub. I bought an extra rocker switch that comes with the fog lights to use next to the fog light switch and use the same wiring to power the switch although it just just makes the switch light up. I use wires from the cool magic lights to actually power the lights from an accessory fuse box. I also had to extend a part of the harness so the plugs would be connected inside and behind the coolant tank. Out of the way rather than have them plugged in right underneath the A arm to the wheel which would be a big unsightly bulge.

I found that the one blank switch spot has a plug underneath because the harnesses the same as on the RT's, but is not used so I got a switch from an RT parts list and used it with this unused plug. Kept the wires to provide power to the switch but used a couple of other wires to connect to the cool magic harness. The pictures below show the full set of plugs underneath and it's the orange one that you're going to use. Look at the white fog light plug and use the same grn/gry wires. So use the pink/yel wires.

View attachment 96732View attachment 96733View attachment 96734


Susie
Sent from my iPad using Tapatalk

Thanks Susie, going to try my hand at it tomorrow. :thumbup:

Dennis