Cruise Control

[rayeade]

I am having a problem with my cruise control. When I try to set it the screen shows it going from on to set to off. The switch has been replaced twice now. I think there is something else going on. Any suggestions?


Sent from my iPad using Tapatalk HD

 

[Bob Denman]

Could it be that you're indadvertently pushing the switch a little bit sideways, when trying to set it? :dontknow:
Mine is a bit fussy; I've found that if I just do EXACTLY what the instructions say... :thumbup:

 

[rayeade]

Bob,

I will give your suggestion a try.

 

[napper39]

push nstright dowen to set if you are pushing just a little sidewas it turns off.:2thumbs::chat:

 

[swmp321]

Cruise won't work?

push nstright dowen to set if you are pushing just a little side was it turns off.:2thumbs::chat:

I don't understand straight and up and down. Do you mean straight fully to the left? Up and down disconnects the cruise? I have not been able to get mine to work either but then again I don't use the cruise very often.

 

[samewok]

If it still does it try putting your foot under the brake pedal and pull up while you set it.
mine did that until I got the switch adjusted.

 

[Bob Denman]

:agree: Brakelight switch :shocked:... VERY good catch! :clap: :thumbup:

 

[Wiredux]

I am having a problem with my cruise control. When I try to set it the screen shows it going from on to set to off. The switch has been replaced twice now. I think there is something else going on. Any suggestions?


Sent from my iPad using Tapatalk HD

What year is your Spyder? Maybe have the Tech take a look at the gear position switch.

 

[Gray Ghost]

I don't understand straight and up and down. Do you mean straight fully to the left? Up and down disconnects the cruise? I have not been able to get mine to work either but then again I don't use the cruise very often.

You push down on the top of the switch to set the cruise control. Once you have set a speed, and canceled by hitting the brake or shifting gears you resume by pushing up on the bottom of the switch.

 

[rayeade]

2013Rt L


Sent from my iPad using Tapatalk HD

 

[bruiser]

Not to be condescending but are you turning the cruise on first before setting it? To turn it on, move the switch to the right, once you have the speed, push down on the switch to set the cruise. Once cruise is set, moving the switch up increases speed, moving the switch down decreases speed.

I answered a similar question before from someone who didn't turn it on first.

 

[rayeade]

I took the Spyder out this morning and made sure to move the cruise control switch in the correct manner and it did not work. The display cycled from on to set to off. Tried hold putting my foot under the break pedal and the same results? The bike goes to the dealer next week for them to look at it.


Sent from my iPad using Tapatalk HD

 

[gonker]

New 2014 and mine dont work either. Tech said bad switch assembly on the handlebar. Waiting on a new one. The run/stop switch is touchy also. I think I could look at it hard and the bike quits running.