-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Corbin armrest installation help
- Thread starter dbaucum
- Start date
YIRYDE
formerly pman2011
I just installed my armrest and didn't have any problems either. I used the color instructions that I found on line verses the black and white instructions they include with the armrest.
Here is a link to the color instructions. http://www.corbin.com/can-am/install_ca-rt-10-arm.pdf
What step are you having problems with?
Here is a link to the color instructions. http://www.corbin.com/can-am/install_ca-rt-10-arm.pdf
What step are you having problems with?
stevedfive
New member
I have changed out three of them. It sounds like you forgot to remove a screw. Feel free to PM me and I will send you my phone number.
I have asked Steve to help.
It is step 5. I have removed all the screws in the preceding steps. It's loose but will not release. Maybe I need to pull harder but the whole bike moves when I pull hard.
Thanks for all the help. I did print the instructions in color. That's much better than what came with the product.
It is step 5. I have removed all the screws in the preceding steps. It's loose but will not release. Maybe I need to pull harder but the whole bike moves when I pull hard.
Thanks for all the help. I did print the instructions in color. That's much better than what came with the product.
Red RT-S
New member
Corbin Armrest installation
The instructions that came with my Corbin armrests said there are 2 screws inside the trunk that hold the stock armrests on. There are actually 3 screws. If you haven't found and removed the third screw, get a flashlight and look deeper into the trunk.
The instructions that came with my Corbin armrests said there are 2 screws inside the trunk that hold the stock armrests on. There are actually 3 screws. If you haven't found and removed the third screw, get a flashlight and look deeper into the trunk.
MS_Spyderman
New member
I had the same problem. The instructions say to remove the four screws inside the trunk sides; it should say six(6) screws. Step 2 refers to them as Allen bolts.
Mark in MS
mtdoragary
New member
I had to grind some clearance on the speaker grilles and getting the hooks on the outside covers to unhook and re-hook was troublesome, but they are installed now.
Similar threads
