Conformt seat

[3rdwheel]

I popped for a COMFORT SEAT and its not so comfy. I'm disappointed, for the money spent I expected better.

Is there a way to move the handle bar higher?? About 1 inch should do it

 

[Chupaca]

Little checking..!!

Home page, sponsors have a variety of risers. Brp also has adjustable bars. Check them out..!! :thumbup:

 

[SpyderAnn01]

If the handlebars on the ST are like the ones on the RS you can add a riser. There are several options available if that is the case. Good luck.

 

[Flamewinger]

So far the only handlebar risers That I could find are the ones that raise the grips 2-3". I don't see how they're installed as it requires cutting the handlebar tube.

Wish they were like the RT's, but they're not. The RS riser is a 3 bolt hole block and the ST needs a 4 bolt hole.

 

[DrewNJ]

You could swap your ST bars for RT bars. That would get you the rise your looking for. A few have put the ST bars on on their RS with good results. All the 13's have the same mounting method and bolt pattern

Sent from my SCH-I545 using Tapatalk

 

[3rdwheel]

Handle bars

The reason I'm looking to rise the bar is because the new COMFORT SEAT has me sitting down hill and that puts a lot of weight on my shoulders and arms. Not so bad around town but there would be some stress on a long trip.:sour:

 

[Just Doo Me]

The reason I'm looking to rise the bar is because the new COMFORT SEAT has me sitting down hill and that puts a lot of weight on my shoulders and arms. Not so bad around town but there would be some stress on a long trip.:sour:

I had my seat shaped at a upholsterer to avoid that downhill slide on my GS.They scooped a bit of foam out of the front and rear so the wife wasn't sliding forward as well.

 

[3rdwheel]

Handel bar riser

I had my seat shaped at a upholsterer to avoid that downhill slide on my GS.They scooped a bit of foam out of the front and rear so the wife wasn't sliding forward as well.

So its not just me.

 

[DrewNJ]

I had one on my RS for one ride and couldn't wait to take it off.......

Sent from my SCH-I545 using Tapatalk

 

[3rdwheel]

comfort seat

I had one on my RS for one ride and couldn't wait to take it off.......

Sent from my SCH-I545 using Tapatalk

Well I had a backrest installed for me and she who commands, I don't think that the dealer will be interested in a return. Looks I'm going to eat the 1900.00 unless I can find someone who can work with it.

 

[DrewNJ]

Well I had a backrest installed for me and she who commands, I don't think that the dealer will be interested in a return. Looks I'm going to eat the 1900.00 unless I can find someone who can work with it.

Touch base with motorcycledave and let him know what your trying to accomplish with the seat. I'm sure he could make it a ton better!

Sent from my Venue 8 3830 using Tapatalk

 

[3rdwheel]

Touch base with motorcycledave and let him know what your trying to accomplish with the seat. I'm sure he could make it a ton better!

Sent from my Venue 8 3830 using Tapatalk

I looked all though the home page and I Goggled motercycledave, no luck. Where can I find the Co./Him?

 

[DrewNJ]

I looked all though the home page and I Goggled motercycledave, no luck. Where can I find the Co./Him?

http://www.motorcycledave.com
His username here on spyderlovers is motorcycledave.
He did some seat work with a cover for me and I am more than satisfied. He's also a genuinely great guy.

Sent from my Venue 8 3830 using Tapatalk