The compressor on my 2012 cycles for 3 seconds apx every 30 seconds when set at the highest setting. Since I never change the setting, my wife is always with me, I just leave it set to the highest so I really don't utilize the auto feature. Since there is no leak down, the pressure holds when checking the valve under the seat overnight, I thought I would convert it back to manual by removing the R1 relay and just inflate the shock manually. After pulling the relay I inflated the shock to 75 lbs but once I released the parking brake with the Spyder in gear, it dropped to "0". Is there a way to disconnect the release selonid such that I will not lose pressure?
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Compressor cycling On 2012 RT Limited
- Thread starter palover
- Start date
Cruzr Joe
New member
I am not authorized to make suggestions in this area, But someone who knows better will be along shortly with a lot more sense than i have. Hang in there
Cruzr Joe
My situation on my 2012---
I am taking my 2012 RTS-SE5 to the shop tomorrow in fact due to an issue with my compressor as well.
I felt it cycled way too much so the last time I had it in for service I said something. They reset the BUDS and I thought it was better. Then one day out riding I noticed my Digital Screen read "MANUAL" for my compressor etc.,
I too have tried to air up the airbag manually and as soon as I disconnect the air pump it bleeds off pressure. So either I have a aolenoid problem or a compressor problem.
However, I also know my compressor motor no longer will run, even though my digital display no longer shows "MANUAL" it shows like it normally does but I can't hear the pump running and have checked fuses and relays and all is fine. So will let the shop figure it out.
At one point I thought I heard the pump but it was very faint so if that is the case maybe it is a wiring issue.
I know this all happened since we found out the rear heated hand grips were never hooked up when the bike was new. (go figure)
That is my experience thus far on the compressor and air bag situation----hope to know more after tomorrow but if they have to order parts it's under warranty but will be stuck a while. Wish me luck!
ray:
I am taking my 2012 RTS-SE5 to the shop tomorrow in fact due to an issue with my compressor as well.
I felt it cycled way too much so the last time I had it in for service I said something. They reset the BUDS and I thought it was better. Then one day out riding I noticed my Digital Screen read "MANUAL" for my compressor etc.,
I too have tried to air up the airbag manually and as soon as I disconnect the air pump it bleeds off pressure. So either I have a aolenoid problem or a compressor problem.
However, I also know my compressor motor no longer will run, even though my digital display no longer shows "MANUAL" it shows like it normally does but I can't hear the pump running and have checked fuses and relays and all is fine. So will let the shop figure it out.
At one point I thought I heard the pump but it was very faint so if that is the case maybe it is a wiring issue.
I know this all happened since we found out the rear heated hand grips were never hooked up when the bike was new. (go figure)
That is my experience thus far on the compressor and air bag situation----hope to know more after tomorrow but if they have to order parts it's under warranty but will be stuck a while. Wish me luck!
ray:medicineman48
New member
Medicineman
I had the same problem and ignored it. It was leaking around the line from the compressor connector to the shock. Burned out the compressor and was over $700 to replace. Don't wait too long
I had the same problem and ignored it. It was leaking around the line from the compressor connector to the shock. Burned out the compressor and was over $700 to replace. Don't wait too long
Update on my Air pump/bag situation
Well, I am staying in Branson Missouri while my 2012 Spyder RTS-SE5 is getting it's first experience with warranty repair.
It turns out that my compressor pump motor is running but is not compressing air and also if I try to manually fill my air bag and remove the air chuck, it deflates through the compressor itself so I am SOL.
They said it would be 2-4 days to get the part in and it is Wednesday We are educators on Springbreak so we were able to request OVER NIGHT SHIPPING but in Canada the cut off is 11:00 a.m.. so it won't even ship until tomorrow so it will be Friday before our bike is fixed.
Good news is the part and repair is under the 2nd year of the 2-year warranty and BRP is covering over night shipping.
I was told today that people who live on dirt roads or gravel need to clean around the air bag as dirt sits in that area and they have had instances where those things put holes in the air bag. Luckily mine is fine and I do live in the country on a dirt road but only go 12 mph until I get to the pavement.
Sadly this bike only 2,900 miles on it and the compressor is shot. Oh well.
Soon it will be fixed and all will be good again.
Just wanted to update you on my experience and what has happened.
Well, I am staying in Branson Missouri while my 2012 Spyder RTS-SE5 is getting it's first experience with warranty repair.
It turns out that my compressor pump motor is running but is not compressing air and also if I try to manually fill my air bag and remove the air chuck, it deflates through the compressor itself so I am SOL.
They said it would be 2-4 days to get the part in and it is Wednesday We are educators on Springbreak so we were able to request OVER NIGHT SHIPPING but in Canada the cut off is 11:00 a.m.. so it won't even ship until tomorrow so it will be Friday before our bike is fixed.
Good news is the part and repair is under the 2nd year of the 2-year warranty and BRP is covering over night shipping.
I was told today that people who live on dirt roads or gravel need to clean around the air bag as dirt sits in that area and they have had instances where those things put holes in the air bag. Luckily mine is fine and I do live in the country on a dirt road but only go 12 mph until I get to the pavement.
Sadly this bike only 2,900 miles on it and the compressor is shot. Oh well.
Soon it will be fixed and all will be good again.
Just wanted to update you on my experience and what has happened.
All fixed and okay---
My 2012 RTS-SE5 is back up and going again.
BRP shippped the part over night to get me back up and running and home again. Apparently two factors went into this pump failure for the seat adjuster.
One- the brass fitting was apparently over-tightened by someone at some point because the fitting was cracked, which caused air to leak out and the pump to run too frequently.
Two- apparently moisture/condensation got in there, froze and caused failure of the pump shaft to fail to the actual compressor pistons.
The replacement pump is fine- the brass fitting was changed with another brass fitting to make it work, and it now is quieter then before, airs up faster then it did before- so all is good.
Hopefully this will NOT happen again. Very glad to have it back working again as my tail end was so low headlights were way out of aim.
Even filling the air bag manually would leak out and it wouldn't keep the back up. So------there you have it sports fans!
My first- warranty claim on the 2nd year of ownership and original BRP 2 year warranty and they handled it like professionals!
Also decided while in the shop to get it "Laser Aligned" also.
Just wanted to update the final chapter.
Thanks
My 2012 RTS-SE5 is back up and going again.
BRP shippped the part over night to get me back up and running and home again. Apparently two factors went into this pump failure for the seat adjuster.
One- the brass fitting was apparently over-tightened by someone at some point because the fitting was cracked, which caused air to leak out and the pump to run too frequently.
Two- apparently moisture/condensation got in there, froze and caused failure of the pump shaft to fail to the actual compressor pistons.
The replacement pump is fine- the brass fitting was changed with another brass fitting to make it work, and it now is quieter then before, airs up faster then it did before- so all is good.
Hopefully this will NOT happen again. Very glad to have it back working again as my tail end was so low headlights were way out of aim.
Even filling the air bag manually would leak out and it wouldn't keep the back up. So------there you have it sports fans!
My first- warranty claim on the 2nd year of ownership and original BRP 2 year warranty and they handled it like professionals!
Also decided while in the shop to get it "Laser Aligned" also.
Just wanted to update the final chapter.
Thanks
Similar threads
