Charlottes Web
Member
I had 3 Rt and F3 all worked good with 622 trailer. On 2019 Rt I had to get a different harness it was $40 .
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Compatability and fitment of a RT622 trailer on a 2016 RT
- Thread starter AY4B
- Start date
AY4B
New member
You dont have to remove the left side Tupperware. You raise the seat and remove the black plastic cover on the left side. The plug you are looking for is facing the front end and EZ to get to. The more difficult part is removing a couple or rear panels which isn't really that hard to do. I posted a video from Pierre that shows the whole operation. I routed my cable going from the seat area to the back lower than he did. On the video he ran it thru the upper hole that is big and EZ to use but is higher than the plastic cover. I ran it lower down where the main wires are run. It is a little harder because the hole is much smaller and a tight squeeze to get the plug thru. Its worth the extra effort because it makes for a cleaner installation.Once I have the left side rear Tupperware off, is the wiring plug straight forward to find and unplug? Or is it buried and will need to be tracked down…..
Thanks in advance for any insight.
Last edited by a moderator:
Similar threads
