What dealers or shops along the Colorado front range will install the Baja Ron sway bars? From reading various forum posts I realize this is a fairly easy job IF you can get the 22-24" of lift needed to get the old bar out and the new one in. Since I don't have a way to do that, I'm looking for a shop that will do the install. Thanks!
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Colorado front range - what dealers or shops will install Baja Ron sway bars?
- Thread starter dbh999
- Start date
BajaRon
Well-known member
Not all Spyders have to be up that high. Depends on the year. It isn't that difficult to get the needed height depending on your available options.
pegasus1300
Well-known member
Walmart is your friend. For a lot less then someone will charge you to install a bar, you can get a set of ramps that will raise your Spyder high enough and you can pocket the difference.
Piratezz
Member
If U have a jack, use wooden blocks, under the a arms, and lift the spyder in increments, be sure to secure the rear wheel. There are several solutions for lifting the spyder. The Swaybar install at itself is fairly easy.
Somtimes you'll have to think outside the box, but keep in regard, that you work safe...
Somtimes you'll have to think outside the box, but keep in regard, that you work safe...
BajaRon
Well-known member
Standard car ramps will not get you high enough. I think what is being suggested are loading ramps which you can put on a pickup truck bed or other raised area to get the needed height.
Standard car ramps will do fine for a 2008-2012 Spyder. But they won't come near getting the job done for a 2013+ Spyder. Different animals altogether.
Last edited:
BreckRider
New member
I had mine done by Fremont Motorsports in Florance Co. They have been a Spyder dealer since 2008 and and have a good tech. They will also install car tires. I have been pleased with the work they have done.
ColoradoSpyder
New member
Fremont is also only one of 2 places in Colorado to get a laser alignment. Good people, bought our 2019 from them.
