Rookiespyder
New member
Where do you find all the codes for the Spyder on line or is there a book that you buy from a dealer.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Codes
- Thread starter Rookiespyder
- Start date
Bob Denman
New member
Download the SpyderCodes App for your smartphone: that should keep you well-informed! :thumbup:
Rookiespyder
New member
Thanks for the info I got it now.
Chupaca
New member
CPS...
CPS crankshaft position sensor. You would need to check the sensor connections and that it is installed correctly as well as the connection to the ECM engine control module. In many cases it can be a fluke caused by some hic-up and the code will clear after the computers reset. :thumbup: if it clears and then comes back next ryde and you can not find any loose connections then run it by the dealer. It will be the sensor cause it is not likely that your crankshaft moved out of line...:roflblack:
CPS crankshaft position sensor. You would need to check the sensor connections and that it is installed correctly as well as the connection to the ECM engine control module. In many cases it can be a fluke caused by some hic-up and the code will clear after the computers reset. :thumbup: if it clears and then comes back next ryde and you can not find any loose connections then run it by the dealer. It will be the sensor cause it is not likely that your crankshaft moved out of line...:roflblack:
SpyderPolly
New member
Camshaft position sensor is located upper right side of engine behind oil filter housing...check connection... code 340 is error on camshaft position sensor signal...CAPS
Last edited:
billybovine
Active member
Based on other peoples experience posted here. The sensor has gone bad and needs to be replaced. But it is never wrong to do a visual inspection first.
Similar threads
