-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Codes after belt replacement
- Thread starter Cvjj1991
- Start date
Bfromla
Well-known member
FYI the spydercodes app does not have c003c:dontknow: but the other two looks like either you missed a step or knocked a sensor loose,
2159 is VCM: speed not plausible, correlation check failed check for VCM fault.
006: VSS can bus rate message error not reliable, no external troubleshooting possible.
Good luck
Chupaca
New member
Not sure....
Not sure which year and model but codes pop up if you did a belt alignment and adjustment with the wheel off the ground with the engine running and in gear. Also the sensor on the rear can get out of alignment with the calibration disc on the brake. There are new codes that apply to newer models, check with the dealer hopefully they can help.
As for erasing them...Try removing the key and letting the computers reset. They should clear and be stored if not or they return you can try the dealer or someone with the BUDS program . :thumbup:
Not sure which year and model but codes pop up if you did a belt alignment and adjustment with the wheel off the ground with the engine running and in gear. Also the sensor on the rear can get out of alignment with the calibration disc on the brake. There are new codes that apply to newer models, check with the dealer hopefully they can help.
As for erasing them...Try removing the key and letting the computers reset. They should clear and be stored if not or they return you can try the dealer or someone with the BUDS program . :thumbup:
Similar threads
