Code (P1175)

[KdaddyB]

Can anyone tell me what this code is and how to resolve the issue. Check Engine

Code (P1175)

 

[Bob Denman]

http://www.spyderhelp.com/Menu Panels/StartMobile.aspx

P1175 is reading as the ECM...

 

[Chupaca]

Mix rich

idicating your fuel mixture to the rear cylinder is too rich. Check vacuum lines to and from throttle body. Check the others while your there. You may pull the key and next stime find things back to normal but if not and your not into diy dealer time....:thumbup:

 

[KdaddyB]

http://www.spyderhelp.com/Menu Panels/StartMobile.aspx

P1175 is reading as the ECM...

Thanks Bob

very helpful

 

[KdaddyB]

http://www.spyderhelp.com/Menu Panels/StartMobile.aspx

P1175 is reading as the ECM...

idicating your fuel mixture to the rear cylinder is too rich. Check vacuum lines to and from throttle body. Check the others while your there. You may pull the key and next stime find things back to normal but if not and your not into diy dealer time....:thumbup:

Should I change my fuel octane.

I use (93) octane

 

[Elwood58]

Should I change my fuel octane.

I use (93) octane

Fuel Octane is not likely the issue, as the ECM is smart enough to adjust timing on the fly to compensate.

 

[Bob Denman]

:agree: For a 2013 RT-S; 93 octane should do the job just fine...

This could even be something like a sensor that's gone bad...
But check those vacuum lines anyway!
Good Luck! :thumbup:

(Hint: list your bike in your signature; I went and looked up your profile to see what you rode...)

 

[Colin]

Possibly the o2 sensor