chocks for spyder

[mushroom]

Being an OLD (84) man must trailer the spyder some times. The chocks bounce around on the trailer floor. Is there any thing like a Motorcycle chock that I can bolt to the trailer floor? prehaps just for the front wheels.

Other that that I am a Happy spyder rider

 

[aaronsbs]

trailer

pm sent

 

[GeminiJane]

I love that at 84 you're still enjoying riding. I want to be able to say the same when I hit 84. Ryde safe!

 

[aaronsbs]

This is what I did. bottom part is 2" wider than tires. drive up and tie down to front rail. works really great plus Spyder can't roll forward.:2thumbs:

 

[NancysToy]

I just use some plastic auto/RV chocks from Walmart. They are hollow, and open at the sides. I drilled holes in them, and screw them down to the threaded EZ-Lock inserts in my trailer floor. That is so we can remove them or place them elsewhere. If you have no need to move them, they could be bolted down even more readily.

Others have done something as simple as laying a 2x4 across the floor and screwing it down. It needn't be fancy.

 

[Arthur---Mexico]

Motorcycle chocks

Dear mushroom,

You've got to have a beter name than that. I made my chocks and you can have them made also. If you send me your email address I'll send you a sketch of what I did And your not old, I am. I have you beat by one year. And living in Mexico there's all kinds of mushrooms.

You wrote: mushroom;272472] Being an OLD (84) man must trailer the spyder some times. The chocks bounce around on the trailer floor. Is there any thing like a Motorcycle chock that I can bolt to the trailer floor? prehaps just for the front wheels.

Other that that I am a Happy spyder rider[/QUOTE]

 

[burg650]

I use the Black&Gary chocks and they work very well, front wheel goes right in and spyder stays put. http://www.blackandgray.com/TransportRec.shtml?PHPSESSID=b9da9e0b1214fcaecb54c3e7962c3c77

 

[Clicker1944]

I use the Black&Gary chocks and they work very well, front wheel goes right in and spyder stays put. http://www.blackandgray.com/TransportRec.shtml?PHPSESSID=b9da9e0b1214fcaecb54c3e7962c3c77

What size front and back did you get?

 

[SpyderFun]

Dear mushroom,

You've got to have a beter name than that.....

:roflblack::roflblack::roflblack:

 

[spyder08]

What size front and back did you get?

I would also like to know what size for the front chocks. 6" or 8".

 

[burg650]

The pair I got for the front are the 8" and they fit the spyder front wheel perfectly with almost no room for tire movement from side-to-side and I also use straps as well. Did not get any for the back so I can not say which one would work not sure if it would clear the front while loading the spyder since the trailer will be tilted and the front will be lower at that point so it might not clear and feather more I use two ratchet straps that get tighten at each end that make the rear impossible to move (see photos).

 

[bruiser]

The pair I got for the front are the 8" and they fit the spyder front wheel perfectly with almost no room for tire movement from side-to-side and I also use straps as well. Did not get any for the back so I can not say which one would work not sure if it would clear the front while loading the spyder since the trailer will be tilted and the front will be lower at that point so it might not clear and feather more I use two ratchet straps that get tighten at each end that make the rear impossible to move (see photos).

NICE trailer!!!!:2thumbs:

 

[sinkhole]

trailer...

Now that is one good looking trailer! :2thumbs: