Charging system display

[CrystalBeachBum]

Is there a way to display amps or the charging state of your battery?

 

[Chupaca]

Sure..!!

you can install a volt meter. These are available at your autoparts stores. There is also an easier way if you have a visable power outlet. They have a plug in volt meter available online...:thumbup:

Just saw you have an RT...many remove the analog gauges and replace them with volt meters etc. When you do this (remove both guages) a digital guage appears on you screen...

 

[pitzerwm]

It doesn't show amps but voltage and if charging right

 

[Doc - Riverside]

Volt/AMP Meter

I have this installed on mine. Pictures shown are with the key just turned on. AMP display is what load is on the battery from the computers prior to hitting the start button. You can select voltage or AMP anytime.

http://kisantech.com/mag/index.php/chargeguard/cg-25.html

 

[finless]

 

[CrystalBeachBum]

Thanks folks for all your help!

 

[timeless]

I did this

you can install a volt meter. These are available at your autoparts stores. There is also an easier way if you have a visable power outlet. They have a plug in volt meter available online...:thumbup:

Just saw you have an RT...many remove the analog gauges and replace them with volt meters etc. When you do this (remove both guages) a digital guage appears on you screen...

I did this mod and like it a lot!!!!!:yes: